# Dodge 128805 FB-DL-107 3-Bolt Flange Bracket Bearing 1-7/16" Bore Concentric Collar Standard Duty - MROSupply.com ***Dodge 128805 FB-DL-107 three-bolt flange bracket bearing with D-Lok concentric collar locking, 1-7/16" bore, cast iron housing, standard duty ball bearing insert, DualGuard seals with flingers, non-expansion design for fixed positioning, powder coated finish, maximum 5500 rpm, relubricatable, general purpose application.*** ## Product details: - Catalog number: FB-DL-107 - SKU: 125598 - Price: ***$169.42*** Each - Shipping: ***FREE SHIPPING*** ON ORDERS OVER $100 - Typically Ships in: 1 day - Brand: [Dodge](https://www.mrosupply.com/brands/dodge/) - Category: - [3-Bolt Flange Bracket](htts://www.mrosupply.com/bearings/mounted-bearings/mounted-ball-bearings/flanged-mounted-bearings/3-bolt-flange-bracket/) - [Flanged Mounted Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/mounted-ball-bearings/flanged-mounted-bearings/) - [Mounted Ball Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/mounted-ball-bearings/) - [Mounted Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/) - [Bearings](htts://www.mrosupply.com/bearings/) - Unit of measure: each - Weight: 3.750 lb - Technicall support: contact supplier for technical support on +1-864-284-5700 ## Product images: - https://static.mrosupply.com/images/noimage.webp ## Product attributes; - Application: General Purpose - Ball bearing series: 207 series - Bearing Series: 207 series ball bearing - Bearing type: Ball, ball - Bolt Diameter: 0.5000 in - Bolt to bolt max: 2.0000 in, 50.8 mm - Bolt to bolt min: 2.0000 in, 50.8 mm - Bore: 1 7/16 in - Bore Diameter: 1-7/16" - Bore length: 1.7500 in, 44.45 mm - Duty: Standard Duty - Duty Rating: Standard duty - Expansion: No - Expansion capability: Non-expansion (fixed) - Expansion Type: Non-expansion (fixed) - Finish: Powder coated - Greasable: Yes - High temp: No - Housing construction: Solid - Housing material: Cast iron - Housing Material: Cast iron - Housing option: Cast iron - Housing type: Flanged bracket - Housing Type: Three-bolt triangular flange (FB) - I.D.: 1 7/16 in - Insert material: Steel - Insert option: Bearing steel - Insert type: Ball Bearing - Locking: Concentric collar - Lubrication type: Grease - Max RPM: 5500 rpm - Max Speed: 5500 rpm - Relubrication: Yes - Rolling element: Standard duty ball - Seal option: DualGuard seals with flingers - Seal Type: DualGuard seals - Sensor ready: Adapter required - Shaft: Nitrile rubber - Shaft attachment: Clamp collar - Shaft diameter: 1.4375 in - Standoff housing: No - Static load capacity: 3461 lbf, 15395.295 N - Suitable for high temperature: No - Suitable for washdown: No - Type: 3-bolt flange bracket ## Product documents / software: - [Instruction Manual](https://documents.mrosupply.com/product_documents/12/55/125598/332791_oc5ihKP.pdf) - [2D DXF front](https://documents.mrosupply.com/product_documents/12/128805/baldor2d_128805_front_L04SOtL.dxf) - [2D DXF right](https://documents.mrosupply.com/product_documents/12/128805/baldor2d_128805_right_xv5Ybav.dxf) - [2D DXF top](https://documents.mrosupply.com/product_documents/12/128805/baldor2d_128805_top_6UUMEtc.dxf) - [3D DXF](https://documents.mrosupply.com/product_documents/12/128805/baldor_dxf3d_128805_I2zdSly.dxf) - [3D PDF Datasheet](https://documents.mrosupply.com/product_documents/12/128805/baldor_pdf_128805_ow9PgeF.pdf) ## Alternate products to `Dodge 128805 FB-DL-107 3-Bolt Flange Bracket Bearing 1-7/16" Bore Concentric Collar Standard Duty - MROSupply.com`: - [SealMaster FB-16 701237 3-bolt flange bracket bearing unit with 1" bore, set screw lock, and felt-labyrinth seal. Cast iron housing with 52100 bearing steel insert and black oxide coating. Pre-lubricated for general industrial applications.](https://www.mrosupply.com/products/421026/as-markdown/) - [SealMaster FB-23 701245 3-bolt flange bracket bearing with 1-7/16" bore, set screw lock, and felt-labyrinth seal. Cast iron housing with solid base and 52100 bearing steel insert, black oxide coated. Pre-lubricated Gold Line unit for general industrial mounting.](https://www.mrosupply.com/products/2257234/as-markdown/) - [SealMaster FB-12 701233 3-bolt flange bracket bearing unit with 3/4" bore, set screw lock, and felt-labyrinth seal. Cast iron housing with 52100 bearing steel insert and black oxide coating. Pre-lubricated for general industrial applications.](https://www.mrosupply.com/products/421020/as-markdown/) - [SealMaster FB-16T 705614 3-bolt flange bracket bearing with 1" bore, SKWEZLOC concentric locking, and felt-labyrinth seal. Cast iron housing with 52100 bearing steel insert and black oxide coating. Pre-lubricated for general industrial applications.](https://www.mrosupply.com/products/2257223/as-markdown/) - [AMI UCFB206-20 three-bolt flange bracket bearing with 1-1/4" bore, set screw locking, and cast iron housing. Wide inner ring design for normal duty applications. Chrome steel insert provides reliable performance in industrial mounting.](https://www.mrosupply.com/products/16712/as-markdown/) - [SealMaster FB-20 701242 3-bolt flange bracket bearing with 1.25" bore, set screw lock, and felt-labyrinth seal. Cast iron housing with black oxide coated 52100 bearing steel insert. Pre-lubricated for general industrial mounting applications.](https://www.mrosupply.com/products/2257229/as-markdown/) - [Browning VFBS-216 764425 3-bolt flange mounted ball bearing with a 1-inch bore and setscrew locking. The cast iron housing supports a 52100 bearing steel insert with a black oxide coated inner ring, single lip contact seal, and flinger. Suitable for conveyor, fan, and general industrial applications where a compact flange mount is required.](https://www.mrosupply.com/products/2271938/as-markdown/) - [AMI UCFB204-12 three-bolt flange bracket bearing with 3/4" bore and set screw locking. Cast iron housing, chrome steel insert, wide inner ring design. Normal duty rating for standard industrial applications. 200 series.](https://www.mrosupply.com/products/17469/as-markdown/) ## Suggested products: - [Dodge 123595 P2B-VSCB-012 two-bolt pillow block bearing with 3/4" bore, intermediate duty set screw locking, 204 series ball bearing, cast iron housing, non-expansion (fixed) design, DualGuard seals with flingers, 7500 rpm maximum speed.](https://www.mrosupply.com/products/126948/as-markdown/) - [Dodge 052012 P2B-SC-012-NL two-bolt pillow block bearing with 3/4" bore, 65° set screw locking, cast iron housing, standard duty ball bearing insert, and DualGuard seals with flingers. No-lube sealed design for maintenance-free operation in general purpose applications. Non-expansion fixed bearing with powder coated finish.](https://www.mrosupply.com/products/123364/as-markdown/) - [Dodge 139116 P2B-DL-25M-LLS two-bolt pillow block bearing with 25mm bore, D-Lok concentric clamp collar locking, normal duty, and low torque labyrinth seal. Cast iron housing with relubrication capability for general purpose applications. Non-expansion design with bearing steel insert.](https://www.mrosupply.com/products/5003229/as-markdown/) - [Dodge 068372 P2B-SC-20M-NLS two-bolt pillow block bearing with 20mm bore, set screw locking, normal duty, and cast iron housing. Non-expansion design with DualGuard seals and flingers for general purpose applications. Pre-lubricated and sealed for life, requiring no relubrication.](https://www.mrosupply.com/products/5002792/as-markdown/) - [Dodge 123803 P2B-SC-012 two-bolt pillow block ball bearing with 3/4" bore, 65° set screw locking, standard duty rating, cast iron housing, DualGuard seals with flingers, 204 series insert, non-expansion design. Powder coated finish for general purpose applications. Maximum speed 7500 rpm. Relubrication enabled.](https://www.mrosupply.com/products/123363/as-markdown/) ## Product's reviews: - E20 - This is exactly what I needed. Price was way below my local business that carries couplings. Thanks. - Re-seller discount needed - Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself! - Best price - Best price on the market with fast shipping. - Friction discs - shipped quickly worked as expected ## FAQ: - How do I keep water out of a bearing on a wet shaft (washers, washdown conveyors)?: Three factory-recommended angles: a more robust multi-lip seal option for the housing where one exists; Dodge's modern SAF-style mounted bearing, which installs faster than a traditional SAF assembly and seals better; and continuous lubrication with an automatic lubricator (IntelliLube), which keeps a positive grease purge at the seal so water is pushed out instead of drawn in. - Which Dodge bearings hold up on sand-and-gravel conveyors with regular washdown?: Dodge's Harsh Duty series (formerly the Defender series) was designed for aggregate duty. It's a seal upgrade over the standard product with identical mounting dimensions, so it drops into your existing footprint: Harsh Duty versions exist for Type E and TAF tapered-roller pillow blocks and for ball bearings (ED suffix). The tapered line carries a one-year performance guarantee against solid-particle-contamination failure when commissioned with a Dodge IntelliLube automatic lubricator. - What grease do Dodge bearings come with from the factory?: Standard Dodge mounted bearings ship shaft-ready with an NLGI #2 lithium-based grease. Ball bearing inserts are factory-filled with Mobil Unirex N2 (a lithium complex grease); roller bearings get a heavier grease, Mobil XHP 222. Bearings can also be ordered dry, or with a special grease, if your plant runs its own lubrication standard. - How much grease is in a Dodge bearing out of the box?: Most standard Dodge bearings ship with a 33–35% factory grease fill. Washdown bearings ship 100% full; Harsh Duty ball bearings ship at 66%. All are shaft-ready out of the box — no pre-lube needed before installation. - How does Dodge warranty evaluation work if a product fails?: Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat. - Q2: How do 3-bolt flange bearings compare to 4-bolt designs?: 3-bolt units are more cost-effective and suitable for light-duty applications with lower loads and speeds, while 4-bolt designs offer superior stability and can handle heavier loads and higher-speed operation. Choose 3-bolt for budget-conscious applications; select 4-bolt when stability and high-load capacity are critical. - Q3: What load ratings should I expect?: Standard 3-bolt flange units typically have dynamic load ratings (Cr) ranging from 7.35 kN to 19.8 kN and static load ratings (C0r) from 4.78 kN to 15.2 kN, depending on bore size. Larger bore units (25-35mm) deliver higher load capacities suitable for moderate-duty conveyor and machinery applications. - Q5: What material options are available for corrosion-resistant applications?: Cast stainless steel and machined stainless steel housings are available for food-processing and washdown environments, while thermoplastic and thermoset polymer options provide corrosion resistance in chemical or salt-water applications. Many manufacturers also offer 3-bolt units with food-grade lubricants for hygienic use. - Q4: What is the correct installation procedure for 3-bolt flange units?: Remove all burrs and rust from the shaft using emery cloth and verify shaft diameter meets manufacturer tolerance; mount the unit with a cross-pattern (star pattern) bolt torque sequence to ensure even pressure distribution. Always consult the manufacturer's torque specification for your specific model. - Q1: What bore sizes are available for 3-bolt flange bracket bearings?: Standard 3-bolt flange units range from 12mm to 35mm bore diameters, with common sizes at 12, 15, 17, 20, 25, 30, and 35mm, covering applications from light-duty to moderate industrial loads. Metric and imperial options are available from major manufacturers including NSK, SKF, and Timken. - Can flanged mounted bearings handle both radial and axial loads?: Most flanged mounted bearings are designed to absorb high radial loads, while some units can handle moderate axial loads in both directions. Check the manufacturer datasheet for your specific bearing model to confirm dynamic and static load ratings before final selection. - Do flanged mounted bearings require periodic maintenance like standard bearings?: Many flanged mounted bearings come with permanent grease lubrication sealed for life, eliminating the need for re-greasing during operation. However, some designs may require periodic relubrication depending on operating conditions, so always verify the maintenance requirements with your bearing's technical documentation. - What mounting surface requirements must I meet for proper flange installation?: The mounting surface must be flat and stable to prevent angular, axial, or parallel misalignment that can cause edge loads and premature bearing failure. Confirm that your housing face is clean and flat within tolerance, and that all bolt holes align correctly before installation. - What critical dimensions do I need to know to select the right flanged mounted bearing?: You need to verify four key dimensions: bore diameter (the shaft size), outer diameter (housing bore fit), bearing width, and flange outer diameter and thickness. These specifications ensure proper load distribution and prevent slipping or misalignment during operation. - What is the main advantage of a flanged mounted bearing over a standard bearing?: Flanged mounted bearings have an integrated mounting flange that acts as a built-in retaining surface, eliminating the need for separate brackets, adapters, or machining. The flange provides precise axial positioning and simplifies installation by allowing you to bolt directly to your housing surface, reducing assembly time and cost. - How do I install a mounted bearing correctly?: Verify your shaft diameter is within the bearing bore tolerance (consult the NSK or SKF datasheet), then secure the bearing to the mounting surface using the specified bolt torque and engage the locking collar or set-screw on the shaft to prevent axial slip. Hand-rotate the shaft through several complete turns with a dial indicator, laser alignment tool, or feeler gauge to confirm smooth operation and proper shaft runout within spec. - How often should I grease a mounted bearing?: Use the formula (OD in mm) × (Width in mm) × 0.005 = grams for periodic relubrication of the bearing element only; initial housing cavity fill is separate and should be 30–50% of free volume. Over-greasing damages seals and generates excess heat—stick to the calculated quantity and recommended relubrication schedule. - What temperature should a mounted bearing run at?: Monitor housing surface temperature (the standard MRO measurement point): 40–65°C is normal, 70–75°C warrants investigation of misalignment or over-greasing, and 80°C requires immediate shutdown. The inner race runs 15–30°C hotter than the housing surface, so an 80°C housing reading means lubricant degradation is accelerating and the bearing requires emergency diagnosis. - When should I replace a mounted bearing?: Replace based on condition: vibration signature analysis or ultrasonic emission (detected with a hand-held meter) indicates wear hours or days before audible noise appears, and is the actionable MRO signal. Other replacement triggers include continuous operation above 80°C housing temperature, visible grease leakage, or reaching the manufacturer's service interval for your duty cycle. Scheduled relubrication and temperature monitoring extend service life significantly — replacement is a last resort, not preventive maintenance. - What are the main types of mounted bearings?: Mounted bearings come in four main forms: pillow blocks (flat-base, shaft parallel to mounting surface), flange mounts (perpendicular shaft, available in 2-bolt and 4-bolt variants with different radial ratings), hanger bearings (overhead support for long horizontal shafts), and take-up frames (adjustable center-distance units for belt or chain drive tensioning). Select based on your shaft orientation, load direction, and space constraints. - How do I choose the right type of bearing for my application?: Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design. - How do I choose the right bearing for my application?: Bearing selection depends on five key factors: 1. Load Type and Direction — Determine whether your application has radial loads (perpendicular to shaft), axial loads (along the shaft), or combined loads. Deep groove ball bearings suit primarily radial loads; tapered roller bearings excel at combined loads; thrust bearings handle pure axial forces. 2. Rotational Speed — Ball bearings support higher speeds with lower friction. Roller bearings are better for medium-speed, heavy-load applications. Verify bearing speed ratings against your operating RPM. 3. Load Capacity — Select a bearing with adequate load capacity for your application. Basic dynamic load rating (C) and basic static load rating (C₀) determine how much load the bearing can safely carry. 4. Lubrication Requirements — Choose between grease and oil lubrication based on speed, temperature, and load. High-speed or high-temperature applications typically require oil circulation; lower-speed applications can use grease. 5. Precision and Rigidity — Evaluate your application's tolerance for runout deviation. High-precision applications require tighter tolerances and higher-grade bearings. - What is bearing life (L10) and how does it affect my equipment maintenance?: L10 Life Definition (ISO 281) — L10 is the basic rating life at which 90% of a large group of identical bearings are statistically expected to survive under constant load and speed. It is calculated in millions of revolutions using the formula: L10 = (C/P)^p, where C is the basic dynamic load rating, P is the equivalent dynamic bearing load, and p is the life exponent (3 for ball bearings). Converting L10 to Operating Hours — To express L10 life in hours: L10h = (L10 × 10^6) / (60 × n), where n is rotational speed in RPM. For example, a bearing with L10 = 1,000 million revolutions operating at 3,600 RPM has approximately L10h ≈ 4,630 hours. Modified Life (L10a) — Actual bearing life also depends on lubrication quality, contamination, speed, temperature, and bearing accuracy. ISO 281 defines a modified life factor (a₁ × aISO) that adjusts the theoretical L10 for these real-world conditions. High-quality lubrication and proper maintenance can extend bearing life significantly; poor lubrication or high contamination reduces it. Why It Matters for Maintenance — L10 life helps you schedule preventive maintenance, budget for bearing replacement, and select bearings adequate for your duty cycle. - How should I maintain and lubricate bearings?: Lubrication Importance — Improper lubrication causes over 40% of bearing failures. Proper bearing lubrication prevents friction damage, dissipates heat, protects against corrosion, and acts as a barrier against contaminants (dust, moisture, debris). Lubrication Selection — Choose between grease and oil based on: - Grease: Suitable for low-to-medium speed, sealed bearings, and applications without continuous circulation. Easier to apply and retain. Common for motors, household appliances, and sealed units. - Oil Mist or Circulating Systems: Better for high-speed applications, high-temperature environments, and heavy-load machinery where heat dissipation is critical. Best Practices: 1. Map all lubrication points and create a maintenance schedule. 2. Use the correct lubricant type and viscosity grade specified by the bearing manufacturer. 3. Store lubricants in sealed, labeled containers away from moisture and contaminants. 4. Monitor bearing temperature and vibration; unusual heat or noise may indicate inadequate lubrication or bearing wear. 5. Replace bearings before reaching L10 life if contamination or lubrication failure is detected. - What are dynamic and static load ratings, and why do they matter?: Static Load Rating (C₀) — The maximum load a stationary or slowly rotating bearing can support without permanent deformation of its rolling elements or raceways. Defined by ISO 76 as the load producing 0.01% permanent deformation of the rolling element diameter. Static load capacity is the limiting factor when a bearing operates at very low speeds or remains stationary under heavy loads. Dynamic Load Rating (C) — The constant load a bearing can endure for a specified number of revolutions (the L10 life, at which 90% of identical bearings are expected to survive). Dynamic load rating determines how long a bearing will last under rotating or oscillating motion. ISO 281 defines the L10 calculation using the formula: L10 = (C/P)^p, where C is dynamic load rating, P is equivalent dynamic load, and p is the life exponent (3 for ball bearings, 10/3 for roller bearings). Why They Matter — Static load rating determines if a bearing can handle peak loads without permanent damage (even if not rotating). Dynamic load rating determines operational life. For high-speed applications, dynamic rating is critical. For low-speed or stationary loads, static rating may be the limiting factor. Always verify both ratings against your application's load profile. - What bearing materials are available and which should I use?: Standard bearing materials include: - Chrome Steel — Premium bearing steel used by SKF, NSK, Timken, and most manufacturers. Offers excellent hardness, fatigue resistance, and durability in standard industrial applications. Most common for ball and roller bearings. - Stainless Steel — Provides corrosion resistance for applications in wet, humid, or chemically corrosive environments. Used in food processing, marine, and pharmaceutical equipment. - Ceramic Hybrid Bearings — Combine steel races with ceramic rolling elements. Offer reduced friction, lower heat generation, and higher temperature capability. Used in high-speed, high-precision applications and aerospace. - Polymeric Bearings — Utilize fluoropolymer composites with embedded graphite or PTFE. Provide low friction in high-speed applications where lubrication film breakdown would be problematic. Material selection depends on operating environment (temperature, moisture, chemical exposure), speed, load, and precision requirements. Standard chrome steel bearings suit most industrial MRO applications. - What is a bearing and what does it do?: A bearing is a mechanical component that enables smooth rotational or linear motion by reducing friction between moving parts. Bearings support loads and facilitate the transfer of forces between moving elements, preventing direct metal-to-metal contact that would cause wear and heat buildup. Rolling element bearings contain balls or rollers that rotate within races (raceways) to minimize friction. Common types include ball bearings (used for moderate loads and high speeds), roller bearings (used for heavy loads at medium speeds), and angular contact bearings (designed for combined radial and axial loads). Bearings are essential in industrial equipment including motors, pumps, compressors, gearboxes, turbines, and conveyor systems.