# FAG 6224MA.C4 Deep Groove Ball Bearing - 120mm Bore, C4 Clearance, Ball Guided Cage - MROSupply.com

***FAG 6224MA.C4 deep groove ball bearing with 120mm bore. Features C4 clearance and a ball guided cage for high-speed applications. This single-row radial bearing accommodates radial and axial loads in both directions. Suitable for electric motors, pumps, and gearboxes.***



## Product details:

- Catalog number: 6224MA.C4
- SKU: 2175847
- Price: ***$460.56*** Each
- Shipping: ***FREE SHIPPING***  ON ORDERS OVER $100
- Typically Ships in: 1 day
- Brand: [FAG Bearing](https://www.mrosupply.com/brands/fag-bearing/)
- Category: 
    - [6200 Series Ball Bearings](htts://www.mrosupply.com/bearings/ball-bearings/6200-series-ball-bearings/)
    - [Ball Bearings](htts://www.mrosupply.com/bearings/ball-bearings/)
    - [Bearings](htts://www.mrosupply.com/bearings/)
- Unit of measure: each
- Weight: 13.969 lb


## Product images:
- https://static.mrosupply.com/images/noimage.webp


## Product attributes;

  
- Cage: Ball Guided
  

  
- Dimensions: 120 mm outer diameter, 62 mm inner diameter, 24 mm width
  

  
- I.D.: 4 5/7 in
  

  
- Inside Diameter: 62 mm
  

  
- Load Ratings: Dynamic load rating of 53 kN, static load rating of 32 kN
  

  
- Outside Diameter: 120 mm
  

  
- Speed: 300 RPM
  

  
- Speed Rating: Maximum operating speed of 5, 300 RPM for optimal efficiency
  

## Alternate products to `FAG 6224MA.C4 Deep Groove Ball Bearing - 120mm Bore, C4 Clearance, Ball Guided Cage - MROSupply.com`:
- [SKF 6224 M/C4 deep groove ball bearing, 120mm bore, 4.724 in ID, 8.465 in OD, C4 extra loose clearance, polyamide cage. Single-row design handles radial and moderate axial loads in both directions. Suitable for electric motors, pumps, and general industrial machinery requiring greater-than-normal internal clearance.](https://www.mrosupply.com/products/5830342/as-markdown/)
- [NSK 6224MC4 deep groove ball bearing with 120 mm bore and C4 clearance for applications requiring greater internal clearance than standard. Suitable for electric motors, pumps, fans, and general industrial applications.](https://www.mrosupply.com/products/5034030/as-markdown/)






## FAQ:

- How do I choose the right type of bearing for my application?: Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints.
For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials.
In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.


- What are the dimensions and typical uses of a 6200 series ball bearing?: A standard 6200 ball bearing has:
• 10 mm bore
• 30 mm outer diameter
• 9 mm width
The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds.
You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective.
Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.


- What is the difference between deep groove and angular contact ball bearings?: Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors.
Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes.
If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.