# SealMaster USF3B5000E-107 - MROSupply.com

***SealMaster USF3B5000E-107***



## Product details:

- Catalog number: USF3B5000E-107
- SKU: 2253063
- Price: ***$224.02*** Each
- Shipping: ***FREE SHIPPING***  ON ORDERS OVER $100
- Brand: [SealMaster](https://www.mrosupply.com/brands/sealmaster/)
- Category: 
    - [Inserts & Cartridges](htts://www.mrosupply.com/bearings/mounted-bearings/mounted-roller-bearings/inserts-cartridges/)
    - [Mounted Roller Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/mounted-roller-bearings/)
    - [Mounted Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/)
    - [Bearings](htts://www.mrosupply.com/bearings/)
- Unit of measure: each
- Weight: 6.800 lb
- Technicall support: contact supplier for technical support on 800-626-2120


## Product images:
- https://static.mrosupply.com/images/noimage.webp


## Product documents / software:

- [Catalog Page](https://documents.mrosupply.com/product_documents/US/USF3B5000E-108/MCC11012E_Sec_H30.pdf_with_I-69_lX5v84B.pdf)
- [Instruction Sheet](https://documents.mrosupply.com/product_documents/US/USRBE5000AE-311-C/PS-740-0001_787410_rUHwAWu.pdf)
- [3D Drawing IGES](https://documents.mrosupply.com/product_documents/US/USF3B5000E-107/regalpts_beloit_PTS-USF3B5000E-107-DEFAULT_nsST8ix.IGS)

## Product's reviews:
- Drum bearing - Very easy to order, arrived very quickly, We will be ordering more items from here in the future.
- Response - Very knowledgeable sales rep. Excellent delivery time. Very important when supply chains are challenging.
- Bearing - It was delivered on time
- Owner - Your shipment was quick and you have a great price on
Sealmaster bearings. Your Gates and Browning Power Belts were higher than I expected. Great Service Great Price. We have to get right or get left in this market in this market.




## FAQ:

- How do I read a SealMaster tapered roller part number like RPB 207-C2?: The letters are the series, the three digits are the bore and the suffix is seal and base. On inch sizes the first digit is whole inches and the next two are sixteenths: 207 is 2-7/16", 115 is 1-15/16", 300 is 3". Metric sizes are written out (RPB-35MM-2). The final 2 or 4 is a two-bolt or four-bolt base. A C before it means a single-lip contact seal instead of the standard felt seal. The replacement insert uses the same bore code: RPB 207-2 takes an RCI-207, and RCI-207-C is the contact-seal version.


- What is the difference between SealMaster RPB, RPBA, DRPB, RPBXT and SPB pillow blocks?: They share the tapered roller cartridge but differ in lock and housing. RPB has a double lock collar; RPBA has a single collar and takes RCIA inserts. DRPB uses the same RCI insert and load rating as RPB in a larger housing built to the Dodge Double-Interlock footprint: at 2-7/16", shaft height is 3-1/4" against 2-3/4" and overall length 12" against 10-3/8". RPBXT is a four-bolt base built to SAF mounting dimensions. SPB uses a cast steel instead of cast iron housing. ERPB is the expansion version, with ERCI inserts. Match the existing footprint first, then the lock style.


- How do I set up SealMaster expansion roller bearings (ERPB, EDPB) on one shaft?: Use one fixed (non-expansion) unit and one expansion unit per shaft. Put the fixed unit at the drive end and the expansion unit where axial movement is easiest to tolerate, and position its insert in the housing toward the fixed unit so the shaft can grow. Total housing expansion on tapered roller pillow blocks is 3/16" for 1-3/16" to 2-3/16" bores, 1/4" for 2-1/4" to 2-1/2", 5/16" for 2-11/16" to 3-1/2" and 3/8" for 3-15/16" to 5".


- How do I replace the insert in a SealMaster RPB tapered roller pillow block?: Remove the cap bolts and the top half; never mix top and bottom halves between housings. Loosen the setscrews and slide the old bearing off. Check the shaft: +0/-0.0005" up to 2" and +0/-0.0010" from 2-3/16" to 4". Slide the new RCI insert on, seat it in the base, make sure the rubber grommet sits in the top lube hole and the lock pin lines up with its slot, not the lube hole. Refit the cap and torque the bolts (75 ft-lb for 2-1/4" to 3" two-bolt pillow blocks). If the insert swivels by hand, or needs heavy force, replace the whole unit.


- What setscrew torque and misalignment limits apply to SealMaster RPB tapered roller bearings?: RPB units allow plus or minus 3 degrees of static misalignment; going beyond that cuts performance. Tighten each lock collar in stages: first setscrew to half torque, second to full, then the first to full, repeating on the second collar of double-lock units. Collar setscrew torque by bore: 1-3/16" to 1-11/16", 5/32" hex, 12 ft-lb; 1-3/4" to 2-1/2", 3/16" hex, 19 ft-lb; 2-11/16" to 3-1/2", 1/4" hex, 43 ft-lb; 3-15/16" to 4", 83 ft-lb; 4-7/16" to 5", 155 ft-lb. Align setscrews across bearings on the same shaft and never hammer the bearing.


- What grease and maximum speed apply to SealMaster RPB tapered roller bearings?: RPB bearings ship ready to run with a lithium complex grease with EP additive, mineral oil base, NLGI grade 2; relubricate with a compatible lithium complex grease. SealMaster's relube charge is 0.50 oz for 1-3/4" to 2" bores, 0.65 oz for 2-1/4" to 2-1/2" and 0.85 oz for 2-11/16" to 3". Maximum operating speed falls as size rises: 4,000 rpm at 1-3/16" to 1-1/4", 2,500 rpm at 1-3/4" to 2-3/16", 2,000 rpm at 2-1/4" to 2-1/2" and 1,000 rpm at 4-15/16" to 5". Keep running temperature under 200F.


- What seal types are available for insert bearings and cartridges, and when should I use each?: Rubber seals provide basic contamination protection for standard conditions, while heavy-duty triple-lip seals are required for dusty or wet environments. For high-temperature applications, PTFE (Teflon) or FKM (Viton) seals are specified; FKM operates from -40°F to 400°F, while PTFE tolerates temperatures up to 500°F.


- Are sealed insert bearing cartridges maintenance-free, and do they need relubrication?: Sealed cartridge bearings are packed with lithium-based grease and are considered maintenance-free for the bearing's service life. Once the original lubricant fully dissipates, the bearing typically requires replacement rather than relubrication; attempting to overfill can damage seals and reduce bearing life.


- What is the difference between standard clearance and C3 clearance in insert bearings and cartridges?: C3 clearance provides larger internal gaps between the rolling elements and races, making it suitable for high-temperature applications or high-speed operation where thermal expansion occurs. Standard clearance is appropriate for normal operating temperatures and speeds; C3 should be specified when operating above 100°C or at sustained high RPM to avoid binding.


- What are the three key dimensions for selecting an insert bearing or cartridge unit?: The bore (inner diameter), outer diameter (OD), and width define an insert bearing's size and mounting requirements. These three dimensions must match both your shaft and housing specifications to ensure proper fit and load capacity. Measure all three with digital calipers against the manufacturer's size chart to confirm the correct unit.


- How should I install an insert bearing into a housing to avoid damage?: Always apply pressing force only to the inner race being inserted, never through the rolling elements, which can cause permanent damage. Lubricate the housing bore lightly and use steady, even pressure with a press or dead-blow mallet, beginning with light taps to ensure square entry before final seating.


- How do I select the right bearing size and load rating for my application?: Match the bore diameter to your shaft size, then verify the dynamic load rating (C) exceeds your expected radial load. For radial loads, use C ≥ 3× your maximum load as a conservative starting point. Check speed rating against your RPM—pillow blocks typically handle 3,000–4,000 rpm while flange units can push 5,000+ rpm depending on bolt strength and bearing series.


- What's the difference between 2-bolt and 4-bolt flange mounts?: 2-bolt (diamond) flanges fit tight spaces and light-to-moderate loads. Switch to 4-bolt (square) flanges for cantilevered (overhung) loads, torque reversal, or shafts over 50mm—the extra bolts distribute load more evenly and resist side thrust better.


- How should I install and align a mounted roller bearing?: Align the bearing housing parallel to the shaft using a straightedge or dial indicator—misalignment is a leading cause of premature wear. Tighten mounting bolts in a cross pattern to seat the housing evenly. Use a soft mallet to tap the bearing unit into place; never force it. Check alignment after installation.


- What's the difference between pillow block and flange mounted bearings?: Pillow blocks mount parallel to the shaft (shaft runs horizontally along the base), while flange blocks mount perpendicular to the shaft (shaft extends out from the face). Choose pillow blocks for shafts that are level with your mounting surface; choose flange blocks when the shaft is perpendicular to your mount point.


- What lubrication schedule should I follow?: Use the bearing manufacturer's recommended grease grade and relubricate at intervals matched to your speed and load—heavy-duty applications may need monthly service, while light-duty runs can extend to 6–12 months. Over-greasing creates drag and heat; under-greasing causes metal-to-metal contact. Wipe off excess grease to prevent contamination.


- What are the main types of mounted bearings?: Mounted bearings come in four main forms: pillow blocks (flat-base, shaft parallel to mounting surface), flange mounts (perpendicular shaft, available in 2-bolt and 4-bolt variants with different radial ratings), hanger bearings (overhead support for long horizontal shafts), and take-up frames (adjustable center-distance units for belt or chain drive tensioning). Select based on your shaft orientation, load direction, and space constraints.


- When should I replace a mounted bearing?: Replace based on condition: vibration signature analysis or ultrasonic emission (detected with a hand-held meter) indicates wear hours or days before audible noise appears, and is the actionable MRO signal. Other replacement triggers include continuous operation above 80°C housing temperature, visible grease leakage, or reaching the manufacturer's service interval for your duty cycle. Scheduled relubrication and temperature monitoring extend service life significantly — replacement is a last resort, not preventive maintenance.


- What temperature should a mounted bearing run at?: Monitor housing surface temperature (the standard MRO measurement point): 40–65°C is normal, 70–75°C warrants investigation of misalignment or over-greasing, and 80°C requires immediate shutdown. The inner race runs 15–30°C hotter than the housing surface, so an 80°C housing reading means lubricant degradation is accelerating and the bearing requires emergency diagnosis.


- How often should I grease a mounted bearing?: Use the formula (OD in mm) × (Width in mm) × 0.005 = grams for periodic relubrication of the bearing element only; initial housing cavity fill is separate and should be 30–50% of free volume. Over-greasing damages seals and generates excess heat—stick to the calculated quantity and recommended relubrication schedule.


- How do I install a mounted bearing correctly?: Verify your shaft diameter is within the bearing bore tolerance (consult the NSK or SKF datasheet), then secure the bearing to the mounting surface using the specified bolt torque and engage the locking collar or set-screw on the shaft to prevent axial slip. Hand-rotate the shaft through several complete turns with a dial indicator, laser alignment tool, or feeler gauge to confirm smooth operation and proper shaft runout within spec.


- How do I choose the right type of bearing for my application?: Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints.
For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials.
In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.


- What is a bearing and what does it do?: A bearing is a mechanical component that enables smooth rotational or linear motion by reducing friction between moving parts. Bearings support loads and facilitate the transfer of forces between moving elements, preventing direct metal-to-metal contact that would cause wear and heat buildup.
Rolling element bearings contain balls or rollers that rotate within races (raceways) to minimize friction. Common types include ball bearings (used for moderate loads and high speeds), roller bearings (used for heavy loads at medium speeds), and angular contact bearings (designed for combined radial and axial loads). Bearings are essential in industrial equipment including motors, pumps, compressors, gearboxes, turbines, and conveyor systems.


- How do I choose the right bearing for my application?: Bearing selection depends on five key factors:
1. Load Type and Direction — Determine whether your application has radial loads (perpendicular to shaft), axial loads (along the shaft), or combined loads. Deep groove ball bearings suit primarily radial loads; tapered roller bearings excel at combined loads; thrust bearings handle pure axial forces.
2. Rotational Speed — Ball bearings support higher speeds with lower friction. Roller bearings are better for medium-speed, heavy-load applications. Verify bearing speed ratings against your operating RPM.
3. Load Capacity — Select a bearing with adequate load capacity for your application. Basic dynamic load rating (C) and basic static load rating (C₀) determine how much load the bearing can safely carry.
4. Lubrication Requirements — Choose between grease and oil lubrication based on speed, temperature, and load. High-speed or high-temperature applications typically require oil circulation; lower-speed applications can use grease.
5. Precision and Rigidity — Evaluate your application's tolerance for runout deviation. High-precision applications require tighter tolerances and higher-grade bearings.


- How should I maintain and lubricate bearings?: Lubrication Importance — Improper lubrication causes over 40% of bearing failures. Proper bearing lubrication prevents friction damage, dissipates heat, protects against corrosion, and acts as a barrier against contaminants (dust, moisture, debris).
Lubrication Selection — Choose between grease and oil based on:
- Grease: Suitable for low-to-medium speed, sealed bearings, and applications without continuous circulation. Easier to apply and retain. Common for motors, household appliances, and sealed units.
- Oil Mist or Circulating Systems: Better for high-speed applications, high-temperature environments, and heavy-load machinery where heat dissipation is critical.
Best Practices:
1. Map all lubrication points and create a maintenance schedule.
2. Use the correct lubricant type and viscosity grade specified by the bearing manufacturer.
3. Store lubricants in sealed, labeled containers away from moisture and contaminants.
4. Monitor bearing temperature and vibration; unusual heat or noise may indicate inadequate lubrication or bearing wear.
5. Replace bearings before reaching L10 life if contamination or lubrication failure is detected.


- What is bearing life (L10) and how does it affect my equipment maintenance?: L10 Life Definition (ISO 281) — L10 is the basic rating life at which 90% of a large group of identical bearings are statistically expected to survive under constant load and speed. It is calculated in millions of revolutions using the formula: L10 = (C/P)^p, where C is the basic dynamic load rating, P is the equivalent dynamic bearing load, and p is the life exponent (3 for ball bearings).
Converting L10 to Operating Hours — To express L10 life in hours: L10h = (L10 × 10^6) / (60 × n), where n is rotational speed in RPM. For example, a bearing with L10 = 1,000 million revolutions operating at 3,600 RPM has approximately L10h ≈ 4,630 hours.
Modified Life (L10a) — Actual bearing life also depends on lubrication quality, contamination, speed, temperature, and bearing accuracy. ISO 281 defines a modified life factor (a₁ × aISO) that adjusts the theoretical L10 for these real-world conditions. High-quality lubrication and proper maintenance can extend bearing life significantly; poor lubrication or high contamination reduces it.
Why It Matters for Maintenance — L10 life helps you schedule preventive maintenance, budget for bearing replacement, and select bearings adequate for your duty cycle.


- What are dynamic and static load ratings, and why do they matter?: Static Load Rating (C₀) — The maximum load a stationary or slowly rotating bearing can support without permanent deformation of its rolling elements or raceways. Defined by ISO 76 as the load producing 0.01% permanent deformation of the rolling element diameter. Static load capacity is the limiting factor when a bearing operates at very low speeds or remains stationary under heavy loads.
Dynamic Load Rating (C) — The constant load a bearing can endure for a specified number of revolutions (the L10 life, at which 90% of identical bearings are expected to survive). Dynamic load rating determines how long a bearing will last under rotating or oscillating motion. ISO 281 defines the L10 calculation using the formula: L10 = (C/P)^p, where C is dynamic load rating, P is equivalent dynamic load, and p is the life exponent (3 for ball bearings, 10/3 for roller bearings).
Why They Matter — Static load rating determines if a bearing can handle peak loads without permanent damage (even if not rotating). Dynamic load rating determines operational life. For high-speed applications, dynamic rating is critical. For low-speed or stationary loads, static rating may be the limiting factor. Always verify both ratings against your application's load profile.


- What bearing materials are available and which should I use?: Standard bearing materials include:
- Chrome Steel — Premium bearing steel used by SKF, NSK, Timken, and most manufacturers. Offers excellent hardness, fatigue resistance, and durability in standard industrial applications. Most common for ball and roller bearings.
- Stainless Steel — Provides corrosion resistance for applications in wet, humid, or chemically corrosive environments. Used in food processing, marine, and pharmaceutical equipment.
- Ceramic Hybrid Bearings — Combine steel races with ceramic rolling elements. Offer reduced friction, lower heat generation, and higher temperature capability. Used in high-speed, high-precision applications and aerospace.
- Polymeric Bearings — Utilize fluoropolymer composites with embedded graphite or PTFE. Provide low friction in high-speed applications where lubrication film breakdown would be problematic.
Material selection depends on operating environment (temperature, moisture, chemical exposure), speed, load, and precision requirements. Standard chrome steel bearings suit most industrial MRO applications.
