# Morse KK17 KK Series CAM Clutch | MROSupply.com - MROSupply.com

***Morse 2657054 KK17 KK CLUTCH-900***



## Product details:

- Catalog number: 2657054
- SKU: 2296873
- Price: ***$355.69*** Each
- Shipping: ***FREE SHIPPING***  ON ORDERS OVER $100
- Brand: [Morse](https://www.mrosupply.com/brands/morse/)
- Category: 
    - [Cam Clutches](htts://www.mrosupply.com/clutches-and-brakes/mechanical-clutches/cam-clutches/)
    - [Mechanical Clutches](htts://www.mrosupply.com/clutches-and-brakes/mechanical-clutches/)
    - [Clutches and Brakes](htts://www.mrosupply.com/clutches-and-brakes/)
- Unit of measure: each
- Weight: 0.170 lb
- UPC: 662288927358
- Returns: Yes
- Technicall support: contact supplier for technical support on 800-626-2120


## Product images:
- https://static.mrosupply.com/images/noimage.webp


## Product attributes;

  
- Additional Bearing Support Requirement: No
  

  
- Backstopping Clutch: Yes
  

  
- Bore Size (mm): 17
  

  
- Corner Radius: 0.6
  

  
- Dynamic Radial Load Rating (lb): 1573.7
  

  
- Height: 1.1
  

  
- Indexing Clutch: Yes
  

  
- Length: 2.6
  

  
- Lubrication Type: The clutches are supplied with a protective coating of oil and must be lubricated before putting into service.
  

  
- Mounting Housing Diameter: 1.5743/1.5737
  

  
- Mounting Shaft Diameter: 0.6702/0.6698
  

  
- Overall Diameter (in): 1.575
  

  
- Overall Width (in): 0.472
  

  
- Overrunning Clutch: Yes
  

  
- Product Type: KK Series
  

  
- Rated Torque Capacity (ft.-lbs.): 31.7
  

  
- RPM Max. - Outer Race: 1900
  

  
- Static Radial Load Rating (lb): 831.8
  

  
- Type: CAM Clutches
  

  
- Width: 2.5
  
## Product documents / software:

- [Catalog](https://documents.mrosupply.com/product_documents/22/96/2296493/Morse_1296342_Catalog_Rla5BAv.pdf)
- [Catalog Page](https://documents.mrosupply.com/product_documents/KK/KK30/KKC-04-PG2.pdf)
- [Instruction Sheet](https://documents.mrosupply.com/product_documents/KK/KK17/Form4146-004.pdf)
- [Instruction/Installation Manual](https://documents.mrosupply.com/product_documents/22/96/2296883/Morse_2657013_Manual_D7FKRaM.pdf)
- [Specification Sheet](https://documents.mrosupply.com/product_documents/22/96/2296883/Morse_2363307_Specification_Sheet_v5go74P.pdf)

## Product's reviews:
- Perfect fit - Exact match with highly informed technical data to search and get the correct part. I highly recommend MRO Supply!
- Consistent quality - Second purchase, will come again next time.
- Great service - Absolute superb service and timely delivery. Would do business again. 🙌




## FAQ:

- What is the difference between Morse MG, MO, MI and MR cam clutches?: All four are M Series ball bearing clutches built on the same sizes (300A to 700A, plus 750 to 1000) with the same torque per size; the second letter sets the cam cage for the job. MG is general duty: overrunning, backstopping and light indexing. MO has felt seals for low drag in high speed inner race overrunning and ships greased. MI is for high performance indexing above 150 strokes per minute or where indexing accuracy matters. MR has a cam cage that uses centrifugal force to cut cam drag in high speed outer race overrunning. Speeds differ: an MG-600A is rated 1800 rpm inner race and 700 rpm outer race, an MO-600A 2400 rpm inner race.


- What do the -G and FB mean in a Morse clutch number like MG600A-G 2 FB?: MG is the series and duty (M Series, general duty), 600A is the size, -G means grease lubrication, packed at the factory, and 2 FB is a 2 in finished bore. Grease is supplied at no extra cost. Without -G, MG, MI and MR clutches are oil lubricated and ship without oil (MO models come greased), so fill them with automatic transmission fluid before running: half full on MG and MR, and on MI to the level in the instruction sheet. Stock bores have hardened inner races and cannot be reworked, and a matching key comes with each stock inch bore clutch.


- What grease or oil can I use in a Morse cam clutch?: Never use EP oils or greases, or greases with graphite or molybdenum disulfide: they can make the clutch malfunction. For grease, Morse recommends a non-EP NLGI 1 or 2 premium bearing grease, mineral oil based with lithium soap thickener; synthetic polyurea greases are also acceptable. The standard oil is automatic transmission fluid, and oil is recommended for indexing and low temperatures. Intervals and temperature limits depend on the series and duty, so follow its instruction sheet: indexing, 24 hour and dusty service need more frequent relubrication. PB clutches ship greased and KK lightly greased; NSS, NFS and oil lubricated M Series clutches need oil before use.


- How do I specify RH or LH on a Morse PB clutch, and can I reverse it later?: PB clutches (PB-3A to PB-16A) are built for one direction, so state it on the order: right hand (clockwise) or left hand (counterclockwise) drive, viewed from the end shown on the catalog drawing with the inner race driving. Our listings put it at the end of the number, such as PB-6A CLUTCH .750B RH. To change direction, the clutch goes back to the distributor or service center; do not take it apart. NSS and NFS clutches, by contrast, are reversed by turning them through 180 degrees. The PB hub snap ring (RS137 on the PB-6A) is not furnished, and a PB must not be used as a coupling.


- Do Morse KK and NSS clutches fit the same space as a ball bearing?: Yes, the envelope matches the 6200 light series: a KK25 and an NSS25 are 52 mm OD, 25 mm bore and 15 mm wide, like a 6205. NFS clutches match the 6300 series OD and bore but are wider. The fits differ, though: NSS outer races press into a housing bored to H6 and NFS to H7, with a key the full length of the inner race (Form 4146-005). KK clutches have a built in ball bearing, carry radial load and come lightly greased; 1K means keyed inner race, 2K keyed inner and outer, 2GD sealed both sides. NSS and NFS have no radial bearing, so separate bearings must hold concentricity within .0015 in TIR.
