# S2017 SPUR 14 1/2 DEG STEEL - MROSupply.com

***S2017 Degree: 14-1/2 Steel Spur Gear***



## Product details:

- Catalog number: S2017
- SKU: 251273
- Price: ***$40.78*** Each
- Shipping: ***FREE SHIPPING***  ON ORDERS OVER $100
- Brand: [Martin Sprocket](https://www.mrosupply.com/brands/martin-sprocket/)
- Category: 
    - [External Tooth Spur Gears](htts://www.mrosupply.com/gears-gear-racks/gears/spur-gears/external-tooth-spur-gears/)
    - [Spur Gears](htts://www.mrosupply.com/gears-gear-racks/gears/spur-gears/)
    - [Gears](htts://www.mrosupply.com/gears-gear-racks/gears/)
    - [Gears & Gear Racks](htts://www.mrosupply.com/gears-gear-racks/)
- Unit of measure: each
- Weight: 0.080 lb
- Technicall support: contact supplier for technical support on 323-728-8117


## Product images:
- https://static.mrosupply.com/images/noimage.webp


## Product attributes;

  
- Material: Steel
  

  
- Number Of Teeth: 17
  

  
- Outside Dia: 0.950"
  


## Product's reviews:
- Works great - Works perfect and made my gokart way faster
- Great service and selection - I was very pleased to find this on the shelf. The price was fair, and the delivery was prompt.
I will do business again with MRO
- Plate gear - Just what I ordered at a reasonable price. Thank you, Dallas
- Martin c5-20t-19-09 - Quality product. Fast shipping!




## FAQ:

- How do I read a Martin spur gear part number such as TS324BS 1?: The prefix gives material and pressure angle: S is steel at 14-1/2 degrees, TS steel at 20 degrees, C cast iron at 14-1/2 degrees, TC cast iron at 20 degrees, and NM non-metallic. Next comes the diametral pitch, then the tooth count, so S1236 is steel, 12 DP, 36 teeth. An H after the tooth count means hardened teeth. BS followed by a size means bored to size with keyway and setscrew, for example S612BS 1 has a 1" bore. Without BS the gear has a plain stock bore for reboring. TS324BS 1 is therefore a steel, 20 degree, 3 DP, 24 tooth gear with a 1" bore.


- Will a Martin 14-1/2 degree spur gear mesh with a 20 degree gear?: No. Martin's catalog states that 14-1/2 degree pressure angle gears will not operate with 20 degree gears, even at the same diametral pitch, so both gears in a pair must share pitch and pressure angle. In Martin part numbers, 20 degree gears carry a T prefix (TS for steel, TC for cast iron), while S and C gears are 14-1/2 degrees. When replacing one gear of a pair, read the prefix on the surviving gear before ordering. Our Martin range covers both: about 640 S and C gears at 14-1/2 degrees and about 300 TS and TC gears at 20 degrees.


- Should I choose a Martin steel or cast iron spur gear?: Martin steel stock spur gears come plain without hubs (Type A), plain with hubs (Type B), or with a web or web with lightening holes (Types B1 and B2). Cast iron gears come plain with hubs, web, web with lightening holes, or spoke style (Type B3), and are cast with a larger hub for extra strength and larger bores. Steel carries more power at the same size: in Martin's 14-1/2 degree ratings, a 3 DP, 24 tooth gear at 50 RPM is rated 16.32 hp in steel against 9.67 hp in cast iron. Check Martin's horsepower tables for your pitch and speed.


- Can I rebore a Martin spur gear, and what is the largest bore it will take?: Most Martin stock spur gears are supplied with a plain stock bore for reboring; our listings show this as Reborable. Each catalog line gives the stock bore and a recommended maximum bore that leaves room for a standard keyway and setscrew. For example, Martin lists S324 with a 1-7/16" stock bore and a 3-1/4" maximum. If you want a finished bore instead, choose the BS version: S612BS 1, for instance, is listed with a 1" bore, a 1/4 x 1/8 keyway and a 1/4-20 setscrew. Bored to size gears show as Bored To Size on our listings.


- How do I identify a worn, unmarked spur gear to find the Martin replacement?: Count the teeth and measure the outside diameter, then use Martin's formula DP = (N + 2) / OD. Martin's own example: a 46 tooth gear with a 6" OD is 8 DP. Next confirm the pressure angle (14-1/2 or 20 degrees), face width, hub diameter and projection, bore, keyway and setscrews, and whether the teeth are hardened. Pitch, tooth count and pressure angle give you the matching S, TS, C or TC part number. If no stock gear fits, Martin's quote checklist asks for those same details plus material and gear style for a made-to-order gear.
