# TB Woods 7S112 Sure-Flex Plus Flange - Size 7, Type S, 1-1/2" Bore - MROSupply.com

***TB Woods 7S112 Sure-Flex Plus Type S flange with 1-1/2" finished bore for Size 7 elastomeric sleeve couplings. High-strength cast-iron construction with 3/8" x 3/16" keyseat and 5/16-18 UNC setscrew. Compatible with EPDM, Neoprene, Hytrel, and Urethane sleeves; rated 940 in-lb continuous torque with EPDM or Neoprene and 2,875 in-lb with Hytrel.***



## Product details:

- Catalog number: 7S112
- SKU: 338587
- Price: ***$46.31*** Each
- Shipping: ***FREE SHIPPING***  ON ORDERS OVER $100
- Typically Ships in: 1 day
- Brand: [TB Woods](https://www.mrosupply.com/brands/tb-woods/)
- Category: 
    - [Complete Units](htts://www.mrosupply.com/shaft-couplings-and-collars/gear-couplings/complete-units/)
    - [Gear Couplings](htts://www.mrosupply.com/shaft-couplings-and-collars/gear-couplings/)
    - [Shaft Couplings and Collars](htts://www.mrosupply.com/shaft-couplings-and-collars/)
- Unit of measure: each
- Weight: 2.600 lb
- Technicall support: contact supplier for technical support on 888-829-6637


## Product images:
- https://static.mrosupply.com/images/noimage.webp


## Product attributes;

  
- Bore size: 1 1/2 in
  

  
- Bore size (in): 1 1/2
  

  
- Bore tolerance: +.0005 to +.0015
  

  
- Bore tolerance (in): +0.0005 to +0.0015
  

  
- Component WR2 (lbs ft2): 0.0434
  

  
- Component WR²: 0.0434
  

  
- Construction type: Finish bore with keyway
  

  
- Coupling size: 7
  

  
- Dimension (in) (C): 1 27/32
  

  
- Dimension (in) (D): 4.625
  

  
- Dimension (in) (H): 2 13/16
  

  
- Dimension (in) (S): 3/8
  

  
- Dimension (in) (T): 11/16
  

  
- Dimension (in.) (E): 1
  

  
- Flange diameter: 4.625
  

  
- Horsepower Rating at 100 RPM: 50
  

  
- Keyseat (in): 3/8 x 3/16
  

  
- Keyseat size: 3/8 in x 3/16 in
  

  
- Length through bore: 1.84375
  

  
- Material type: High Strength cast iron
  

  
- Max angular gap misalignment: 0.081 (in) with EPDM/Neoprene Sleeves and 0.020 (in) with Hytrel Sleeves
  

  
- Max angular misalignment: 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
  

  
- Max compatible bore size: 1.875
  

  
- Max parallel misalignment: 7
  

  
- Max RPM: 5250
  

  
- Max speed: 5250
  

  
- Min compatible bore size: 0.625
  

  
- Outside diameter: 4.625
  

  
- Power rating at 100 RPM: 1.1 kW with EPDM or Neoprene sleeve, 3.4 kW with Hytrel sleeve
  

  
- Screw size: Setscrew
  

  
- Screw type: Flange, Type S
  

  
- Set screw distance: 0.375
  

  
- Setscrew length: 0.5
  

  
- Setscrew length (in): 1/2
  

  
- Setscrew size, location: 5/16 18 UNC, One over KS and at 90 degrees
  

  
- Setscrew torque requirement: 13
  

  
- Setscrew Torque Requirment (ft lbs): 13
  

  
- SF flange length: 0.6875
  

  
- SF hub diameter: 2.8125
  

  
- SF hub length: 20
  

  
- Torque: 940 in-lb with EPDM or Neoprene sleeve, 2,875 in-lb with Hytrel sleeve
  

  
- Torque rate: 940 (in-lbs) with EPDM or Neoprene sleeve; 2,875 (in-lbs) with Hytrel sleeve
  
## Product documents / software:

- [Catalog Product Section](https://documents.mrosupply.com/product_documents/13/13S238/p-1957-tbw-a4_type-s-sure-flex-plus_6glsuFz.pdf)
- [Full Catalog](https://documents.mrosupply.com/product_documents/L1/L19050MM/p-1690-tbw_QTKXQZG.pdf)
- [Installation And Maintenance Manual](https://documents.mrosupply.com/product_documents/13/13S238/p-7888-tbw_7vuiGcx.pdf)
- [Selection Guide](https://documents.mrosupply.com/product_documents/13/13S238/p-1957-tbw-a4_sure-flex-plus-selection-guide_Z0MkHdR.pdf)

## Product's reviews:
- Great service! - It was all sent perfectly and on time
- Didn’t use yet - I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
- Sleeve - Thanks for quick service and delivery was not long!
- Sales - I have all good experiences with your staff.
Thank you for the support.