# 7JS 7JES EPDM SPLIT SF SLEEVE - MROSupply.com

***TBWOODS 7JS 7JES EPDM SPLIT SF SLEEVE***



## Product details:

- Catalog number: 7JS
- SKU: 340376
- Price: ***$44.52*** Each
- Shipping: ***FREE SHIPPING***  ON ORDERS OVER $100
- Brand: [TB Woods](https://www.mrosupply.com/brands/tb-woods/)
- Category: 
    - [Elements](htts://www.mrosupply.com/shaft-couplings-and-collars/elastomeric-sleeve-couplings/components/elements/)
    - [Components](htts://www.mrosupply.com/shaft-couplings-and-collars/elastomeric-sleeve-couplings/components/)
    - [Elastomeric Sleeve Couplings](htts://www.mrosupply.com/shaft-couplings-and-collars/elastomeric-sleeve-couplings/)
    - [Shaft Couplings and Collars](htts://www.mrosupply.com/shaft-couplings-and-collars/)
- Unit of measure: each
- Weight: 0.620 lb
- Technicall support: contact supplier for technical support on 888-829-6637


## Product images:
- https://static.mrosupply.com/images/noimage.webp


## Product attributes;

  
- Component WR2 (lbs ft2): 0.0109
  

  
- Component WR²: 0.0109
  

  
- Coupling size: 7
  

  
- Dimension (in) (D): 4 11/32
  

  
- Dimension (in) (W): 2-3/16
  

  
- Horsepower Rating at 100 RPM: 8
  

  
- Horsepower rating at 1150 RPM: 8
  

  
- Horsepower rating at 1200 RPM: 8
  

  
- Horsepower rating at 1750 RPM: 8
  

  
- Horsepower rating at 1800 RPM: 9
  

  
- Horsepower rating at 300 RPM: 9
  

  
- Horsepower rating at 3450 RPM: 8
  

  
- Horsepower rating at 3600 RPM: 9
  

  
- Horsepower rating at 50 RPM: 9
  

  
- Horsepower rating at 690 RPM: 8
  

  
- Horsepower rating at 870 RPM: 8
  

  
- Insert design: One-Piece Split
  

  
- KW rating at 100 RPM: 1.1
  

  
- KW rating at 1450 RPM: 16
  

  
- KW rating at 3000 RPM: 33
  

  
- KW rating at 970 RPM: 11
  

  
- Material type: EPDM
  

  
- Max angular gap misalignment: 0.081 in
  

  
- Max angular misalignment: 1°
  

  
- Max compatible bore size: 1.875
  

  
- Max parallel misalignment: 6
  

  
- Max RPM: 5250
  

  
- Max speed: 5250
  

  
- Maximum angular gap misalignment (in): 0.081
  

  
- Maximum parallel misalignment (in): 0.02
  

  
- Min compatible bore size: 0.625
  

  
- Operating temperature: -34°C to +135°C
  

  
- Outside diameter: 4.34375
  

  
- Power rating at 100 RPM: 1.1 kW
  

  
- Screw type: Sleeve, One-Piece with Split
  

  
- Sleeve width: 2.1875
  

  
- Stiffness: 313
  

  
- Stiffness (in lbs rad): 2769
  

  
- Temperature rating: -30°F to 275°F
  

  
- Temperature rating (F): +275ºF to -30ºF
  

  
- Torque: 940 in-lb
  

  
- Torque rate: 940 in/lbs
  

  
- Torque rating (in lbs): 725
  

  
- Torsional stiffness: 2769
  
## Product documents / software:

- [Full Catalog](https://documents.mrosupply.com/product_documents/L1/L19050MM/p-1690-tbw_QTKXQZG.pdf)
- [Installation And Maintenance Manual](https://documents.mrosupply.com/product_documents/13/13S238/p-7888-tbw_7vuiGcx.pdf)
- [Selection Guide](https://documents.mrosupply.com/product_documents/13/13S238/p-1957-tbw-a4_sure-flex-plus-selection-guide_Z0MkHdR.pdf)

## Product's reviews:
- Tb woods - Excelent recomiendo 100%
- Sales - I have all good experiences with your staff.
Thank you for the support.
- Great service! - It was all sent perfectly and on time
- Sleeve - Thanks for quick service and delivery was not long!




## FAQ:

- Which Sure-Flex Plus sleeve material should I choose: EPDM, Neoprene or Hytrel?: EPDM is the general purpose sleeve, rated -30°F to +275°F. Neoprene is the oil resistant, non-flame option, rated 0°F to +200°F. Both allow 1 degree of angular misalignment and wind up about 21 degrees at rated torque, which helps absorb shock. Hytrel is designed for high torque, with three times the relative rating of EPDM or Neoprene (3X against 1X) and a range of -65°F to +250°F. In exchange it winds up only about 7 degrees and allows 1/4 degree of angular misalignment. TB Woods says EPDM suits about 80 percent of applications: confirm the temperature with the end user, and follow the pump or compressor maker's specification where there is one.


- How do I read Sure-Flex Plus part numbers like 8J, 9JS, 12, 9HS and 8SCH178?: Sleeve numbers give the coupling size, then the type. J is a one-piece EPDM sleeve (8J is an 8JE) and JS is one-piece split EPDM (9JS is a 9JES). A size alone is a two-piece EPDM sleeve with a wire ring (12 is a 12E). JN and JNS are the Neoprene one-piece versions, N is two-piece Neoprene, H is solid Hytrel and HS is two-piece Hytrel. A bore after the type means a flange or hub: 6S138 is a size 6 Type S flange with a 1-3/8" bore, and 8SCH178 a size 8 SC hub with 1-7/8". SCHS marks a short hub and MPB a plain bore. Numbers such as 663150 or 73300026 do not decode this way.


- Can I replace an EPDM or Neoprene sleeve with Hytrel in my existing Sure-Flex coupling?: Not as a direct swap. TB Woods states that rubber (EPDM or Neoprene) and Hytrel sleeves have different ratings and must not be used interchangeably, or the sleeve will fail prematurely. H and HS sleeves fit only Type S, C and SC flanges, never Type J or B. H runs in sizes 6 to 12 and HS in sizes 6 to 14. Alignment limits are also tighter: a size 8 rubber sleeve allows 0.020" parallel and 0.094" angular, against 0.015" and 0.025" for Hytrel. Going to Hytrel means reselecting the coupling, not just the sleeve.


- Will new Sure-Flex Plus sleeves fit my existing Sure-Flex flanges?: Yes. TB Woods describes the Sure-Flex Plus sleeve as fully compatible with the industry standard design it created over 50 years ago, and says it retrofits to existing flanges, so you do not need to replace the whole coupling. Keep the same size and check the type against your flange: J, JS, JN, JNS, E and N sleeves fit any flange within a given size, H and HS only Type S, C or SC. A worn sleeve can be sized by its outside diameter and width: a size 8 is 5-1/16" OD by 2-1/2" wide. The 30% torque increase applies to EPDM and Neoprene.


- How do SC spacer hubs work on a Sure-Flex Plus coupling, and what is the difference between SCH and SCHS hubs?: On SC spacer couplings each side is a flange bolted to a separate hub (4JSC has an integral hub), with the cap screws furnished with the hub. The flange number sets the spacing: 9SC50 is for 5" between shafts. SCH is the standard hub, bored up to 3-7/8" on size 14. SCHS is a short hub with a smaller bore range, offered in sizes 6 to 13, and using one changes the assembled length and weight. Some flanges take a larger hub for bigger shafts: 9SC50-11 is a size 9 flange that takes an 11SCH or 11SCHS. Order flanges, hubs and sleeve separately.
