# TB Woods 2AK30 V-Belt Sheave - 2-Groove, 3.0" OD, A/4L Section, QT Bushed - MROSupply.com

***TB Woods 2AK30 two-groove FHP V-belt sheave with 3.0" outside diameter and QT bushing interface. Compatible with A, 4L, and 3L cross-section belts. Cast-iron construction, balanced for industrial drives up to 8200 RPM.***



## Product details:

- Catalog number: 2AK30
- SKU: 347108
- Price: ***$100.16*** Each
- Shipping: ***FREE SHIPPING***  ON ORDERS OVER $100
- Typically Ships in: 1 day
- Brand: [TB Woods](https://www.mrosupply.com/brands/tb-woods/)
- Category: 
    - [A Section](htts://www.mrosupply.com/sheaves/split-taper-bushed-bore-sheaves/a-section/)
    - [Split Taper Bushed Bore Sheaves](htts://www.mrosupply.com/sheaves/split-taper-bushed-bore-sheaves/)
    - [Sheaves](htts://www.mrosupply.com/sheaves/)
- Unit of measure: each
- Weight: 1.700 lb
- Technicall support: contact supplier for technical support on 888-829-6637


## Product images:
- https://static.mrosupply.com/images/noimage.webp


## Product attributes;

  
- Belt section: A-4L-3L
  

  
- Bore type: Quick disconnect bushing
  

  
- Bushing: QT
  

  
- Component WR2 (lbs ft2): 0.02
  

  
- Datum diameter: 2.8
  

  
- Dimension: 0.88
  

  
- Face width: 1.38
  

  
- Face width (in): 1.38
  

  
- Groove cross section section: A
  

  
- Hub location: -0.44
  

  
- Hub location (in): -0.44
  

  
- I.D.: 1.57
  

  
- Inertia WR²: 3
  

  
- Inside diameter (in): 1.57
  

  
- Material type: CI
  

  
- Max RPM: 8200
  

  
- Number of grooves: 2
  

  
- O.D.: 3.05
  

  
- Outside diameter (in): 3.05
  

  
- Pitch diameter: 3.05
  

  
- RPM upper limit: 8200
  
## Product documents / software:

- [Catalog Product Section](https://documents.mrosupply.com/product_documents/2A/2AK30/sec-b3.pdf)
- [Full Catalog](https://documents.mrosupply.com/product_documents/2A/2AK30/p-1687-tbw.pdf)
- [Service Manual](https://documents.mrosupply.com/product_documents/2A/2AK30/p-1688-tbw.pdf)
## Alternate products to `TB Woods 2AK30 V-Belt Sheave - 2-Groove, 3.0" OD, A/4L Section, QT Bushed - MROSupply.com`:
- [Browning 2AK30H 1042712 2-groove cast iron FHP multi-groove sheave for A/4L section belts with a split taper bushed bore and 3.05-inch outside diameter. Cast iron construction with precision-machined grooves and statically balanced for low vibration. Used in fan drives, blower drives, pump drives, and general HVAC and industrial belt drives.](https://www.mrosupply.com/products/2278466/as-markdown/)
- [Martin 2AK30-H FHP V-belt sheave with 3.050" outside diameter, cast iron construction, and MST bushed design for fractional horsepower drives. Uses Martin Split Taper bushing for secure shaft mounting and easy installation.](https://www.mrosupply.com/products/254346/as-markdown/)
- [Dodge 2MAL30 2-groove A/4L section Quick Detachable bushed bore sheave with 6.5" pitch diameter. Block construction cast iron body for durable power transmission in industrial drives. Designed for A and 4L V-belts, this sheave provides reliable performance in belt drive systems.](https://www.mrosupply.com/products/707055/as-markdown/)
- [MasterDrive 2AK30H 2-groove A section Taper-Lock V-belt sheave, 3.00-inch pitch diameter. Cast iron construction for durability in industrial belt drive applications. Uses Taper-Lock bushing for secure shaft mounting and easy installation.](https://www.mrosupply.com/products/2334811/as-markdown/)

## Product's reviews:
- Didn’t use yet - I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
- Tb woods - Excelent recomiendo 100%
- Sleeve - Thanks for quick service and delivery was not long!
- Great service! - It was all sent perfectly and on time