# NSK 6207 Deep Groove Ball Bearing - 35 mm Bore, Open, Pressed Steel Cage - MROSupply.com

***NSK 6207 single-row deep groove ball bearing with 35 mm bore and 72 mm OD. Open design with no seals or shields, pressed steel cage, and normal (CN) clearance. Suitable for electric motors, pumps, fans, and general industrial applications.***



## Product details:

- Catalog number: 6207
- SKU: 5033743
- Price: ***$32.26*** Each
- Shipping: ***FREE SHIPPING***  ON ORDERS OVER $100
- Typically Ships in: 1 day
- Brand: [NSK Bearings](https://www.mrosupply.com/brands/nsk-bearings/)
- Category: 
    - [6200 Series Ball Bearings](htts://www.mrosupply.com/bearings/ball-bearings/6200-series-ball-bearings/)
    - [Ball Bearings](htts://www.mrosupply.com/bearings/ball-bearings/)
    - [Bearings](htts://www.mrosupply.com/bearings/)
- Unit of measure: each
- Weight: 0.614 lb
- Returns: Yes


## Product images:
- https://static.mrosupply.com/images/noimage.webp



## Alternate products to `NSK 6207 Deep Groove Ball Bearing - 35 mm Bore, Open, Pressed Steel Cage - MROSupply.com`:
- [SKF 6207 is a 35mm bore deep groove ball bearing with normal clearance and a sheet metal cage. This open bearing is designed for radial and moderate axial loads in electric motors, pumps, and general industrial machinery.](https://www.mrosupply.com/products/320647/as-markdown/)
- [FAG 6207 deep groove ball bearing with 35mm bore and 72mm OD. This single row open bearing is designed for high-speed operation and accommodates radial and axial loads. Suitable for electric motors, gearboxes, and industrial machinery. Precision manufactured by Schaeffler for reliable performance.](https://www.mrosupply.com/products/2171340/as-markdown/)
- [NTN 6207 is a 62 series single-row deep groove ball bearing with a 35 mm straight bore. This open bearing is designed for general industrial rotating equipment including electric motors, pumps, and fans.](https://www.mrosupply.com/products/284002/as-markdown/)
- [Rollway 6207 EMQ BALL 16000-61800-62200-62300](https://www.mrosupply.com/products/2889679/as-markdown/)

## Product's reviews:
- Purchasing specialist - Great!!!
- Had what i needed - Found the bearing I needed. Reasonable price. Great phone support.
- Sales - Great Service !!




## FAQ:

- How do I choose the right type of bearing for my application?: Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints.
For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials.
In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.


- What are the dimensions and typical uses of a 6200 series ball bearing?: A standard 6200 ball bearing has:
• 10 mm bore
• 30 mm outer diameter
• 9 mm width
The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds.
You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective.
Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.


- What is the difference between deep groove and angular contact ball bearings?: Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors.
Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes.
If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.