# Timken VAS 7/8 Ball Pillow Block Housed Unit, 7/8 in Bore, GRA014RRB Insert - MROSupply.com

***Timken VAS 7/8 is a two-bolt pillow block housed unit with a GRA014RRB deep groove ball bearing insert for a 7/8 inch shaft. This cast iron housing unit features a dynamic load rating of 3600 lbf and a static load rating of 1700 lbf, suitable for general industrial applications such as conveyors, fans, and light-duty machinery. The unit is pre-lubricated and sealed for maintenance-free operation.***



## Product details:

- Catalog number: VAS 7/8
- SKU: 5080149
- Price: ***$64.38*** Each
- Shipping: ***FREE SHIPPING***  ON ORDERS OVER $100
- Typically Ships in: 1 day
- Brand: [Timken](https://www.mrosupply.com/brands/timken/)
- Category: 
    - [2-Bolt Pillow Block Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/mounted-ball-bearings/pillow-block-bearings/2-bolt-pillow-block-bearings/)
    - [Pillow Block Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/mounted-ball-bearings/pillow-block-bearings/)
    - [Mounted Ball Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/mounted-ball-bearings/)
    - [Mounted Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/)
    - [Bearings](htts://www.mrosupply.com/bearings/)- View suggested `Dodge` alternative
  [Dodge 131971 P2B-SXV-014 two-bolt pillow block bearing with 7/8" bore, eccentric collar locking, intermediate duty cast iron housing, 205 series ball bearing, DualGuard seal, non-expansion design for reliable shaft support applications.](https://www.mrosupply.com/products/130867/as-markdown/)
- Unit of measure: each
- Weight: 1.622 lb
- Returns: Yes


## Product images:
- https://static.mrosupply.com/images/noimage.webp


## Product attributes;

  
- 0.437 in Center of bearing from end: 0.299 in Dimension:31 mm
  

  
- 0.811 in Bolt hole spacing: 104.8 mm
  

  
- 1.22 in Dimension d1: 38.1 mm
  

  
- 1.437 in Bearing Type: Ball Bearing Bearing number:GRA014RRB Bolt hole length:20.6 mm
  

  
- 1.5 in Dynamic load rating: 15500 N
  

  
- 1750 lbf Total height: 71.4 mm
  

  
- 2.811 in Total length: 139.7 mm
  

  
- 4.126 in Bolt hole width: 11.1 mm
  

  
- 5.5 in Total width: 35.7 mm
  

  
- Alternate part name: VAS7/8 Base height:0.594 in Base to Center Height H:36.51 mm
  

  
- Base height: 0.594 in
  

  
- Bearing number: GRA014RRB
  

  
- Bolt hole length: 0.811 in
  

  
- Bolt hole spacing: 4.126 in
  

  
- Bolt hole width: 0.437 in
  

  
- Bore: 7/8 in
  

  
- Center of bearing from end: 0.299 in
  

  
- Dimension: 1.835 in
  

  
- Dynamic load rating: 3600 lbf
  

  
- Inside ring outside diameter: 0.531 in
  

  
- Inside ring width: =Bearings1_Inside Ring Width= mm =Bearings1_Inside Ring Width= in
  

  
- Seal type: Molded Shroud
  

  
- Series: Standard
  

  
- Shaft height: 1.437 in
  

  
- Static load rating: 1700 lbf
  

  
- Total height: 2.811 in
  

  
- Total length: 5.500 in
  

  
- Total width: 1.406 in
  
## Product documents / software:

- [Fafnir Pillow Block Mounted Bearings Eccentric Lo](https://documents.mrosupply.com/product_documents/50/80/5080149/vas-7-8_1AN4ehl)

## Product's reviews:
- Best company to buy from - I always buy from MRO is a very reliable company to work with




## FAQ:

- How do I choose the right type of bearing for my application?: Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints.
For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials.
In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.