# Timken 1100KRR Wide Inner Ring Insert Bearing, 1 in Bore, 2.047 in OD, 3550 lbf Dynamic Load - MROSupply.com

***Timken 1100KRR is a wide inner ring insert ball bearing with a 1 inch bore and 2.047 inch outside diameter. This deep groove ball bearing design features a dynamic load rating of 3550 lbf and a static load rating of 1730 lbf, suitable for general industrial mounted unit applications. The wide inner ring provides enhanced shaft support and stability in pillow block or flange housing assemblies.***



## Product details:

- Catalog number: 1100KRR
- SKU: 5080225
- Price: ***$55.72*** Each
- Shipping: ***FREE SHIPPING***  ON ORDERS OVER $100
- Typically Ships in: 1 day
- Brand: [Timken](https://www.mrosupply.com/brands/timken/)
- Category: 
    - [Inserts & Cartridges](htts://www.mrosupply.com/bearings/mounted-bearings/mounted-ball-bearings/inserts-cartridges/)
    - [Mounted Ball Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/mounted-ball-bearings/)
    - [Mounted Bearings](htts://www.mrosupply.com/bearings/mounted-bearings/)
    - [Bearings](htts://www.mrosupply.com/bearings/)
- Unit of measure: each
- Weight: 0.532 lb
- Returns: Yes


## Product images:
- https://static.mrosupply.com/images/noimage.webp


## Product attributes;

  
- Angle between set screws: 90 °
  

  
- Bearing Type: Ball Bearing
  

  
- Bore: 1 in
  

  
- Bore type: Cylindrical bore
  

  
- Center of bearing from end: 0.689 in
  

  
- Dimension: 1.748 in
  

  
- Dynamic load rating: 3550 lbf
  

  
- I.D.: 1 in
  

  
- Inside ring width: 1.375 in
  

  
- Lubrication type: Non-Relubricatable
  

  
- Material: Bearing steel
  

  
- Number of set screws: 2
  

  
- O. D. type: Cylindrical OD
  

  
- Outside diameter: 2.047 in
  

  
- Outside ring width: 0.591 in
  

  
- Radius: 0.024 in
  

  
- Seal type: Shroud Seal
  

  
- Series: Industrial
  

  
- Set screw size: 1/4-20
  

  
- Static load rating: 1730 lbf
  

  
- Sub series: 1..KRR
  


## Product's reviews:
- Best company to buy from - I always buy from MRO is a very reliable company to work with




## FAQ:

- How do I choose the right type of bearing for my application?: Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints.
For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials.
In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.