We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF / CR Seals (formerly CR Seals) 20674 is a radial shaft oil seal designed for small bore applications. This seal features a spring-loaded sealing lip for consistent radial force. Suitable for use in electric motors, gearboxes, pumps, and other rotating equipment to prevent lubricant leakage and exclude contaminants.
MODEL 20674
Contact supplier for technical support on: 267-436-6000
$24.67 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Auxiliary lip
No
Design
TL6
Housing bore diameter
80.01 mm, 3.15 in
Maximum operating temperature
100.0 °C, 212.0 °F
Maximum operating temperature (°F)
100.0 °C, 212.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Permissible circumferential speed
2.54 m/s
Rotational speed
928.0 r/min
Seal width
6.86 mm, 0.27 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter
52.27 mm, 2.058 in
Type of outside diameter
Metal-cased
Unit system
Inch
Radial shaft seal with double metal case and three sealing lips, for grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. TL6 seals are designed with a double metal case. They have three conventional sealing lips made of nitrile rubber, which optimizes the sealing against the shaft.
- Maximise the exclusion of contamination
- Accommodate low speed
- Easy installation
SKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreSKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read more
| Brand | System Plast |
| Model | VG-P34HR-10 |
| Brand | HUCO Products |
| Model | 538.41.3540 |
| Brand | Bestorq |
| Model | C71 |
SKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreSKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF