We never sell your data to third parties
Omega 7300055MHSUJBS 14" Major Diameter, 22125 lb-in Continuous Torque Rating, Size E70MJ Hydrolytically Stable Urethane (HSU) Close-Coupled Elastomeric Elements, Stainless Steel Metric Capscrews, Anti-Corrosion Shoe Coating
MODEL 10287781
Contact supplier for technical support on: 800-626-2120
$1,200.84 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Returnable: See conditions
Cap screws
Stainless Steel Metric Capscrews
Cap Screws
Stainless Steel Metric Capscrews
Continuous torque rating (in-lb)
22125 in/lbs
Continuous Torque Rating (in-lb)
22125 in/lbs
Continuous torque rating (Nm)
2500 Nm
Continuous Torque Rating (Nm)
2500 Nm
Coupling size
E70MJ
Coupling Size
E70MJ
Coupling style
Close coupled
Coupling Style
Close Coupled
Coupling type
Elastomeric
Coupling Type
Elastomeric
Element material
Hydrolytically Stable Urethane (HSU)
Element Material
Hydrolytically Stable Urethane (HSU)
Element style
Hot & Humid Environment Resistance
Element Style
Hot & Humid Environment Resistance
Height
12.00
Length
12.00
Major diameter of coupling (in)
14 in
Major Diameter of Coupling (in)
14 in
Major diameter of coupling (mm)
356 mm
Major Diameter of Coupling (mm)
356 mm
Max speed rating (rpm)
3600 rpm
Maximum Speed Rating (rpm)
3600 rpm
Net Weight
23.10
Series
Elements-Flexible
Shoe coating
Anti-Corrosion
Shoe Coating
Anti-Corrosion
Unit of dimension
in
Unit of Dimension
IN
Volume
0.283
Volume unit
Hectoliter
Volume Unit
Hectoliter
Weight unit
LB
Width
12.00
An element is the flexible portion of an Omega coupling and includes mounting hardware. Elements are offered in high-misalignment Orange, high-torque Heavy Duty Yellow (HDY) with +25% greater torque capacity, and Hydrolytically Stable Urethane (HSU) Green for hot and humid environments.
No questions match your search.
What do the letters after a Rexnord Omega element part number mean? This product
The seven digit base number sets the size: 7300020 is an E5 and 7300035 an E30 close-coupled element, while spacer elements carry ES sizes (7300105 is an ES30). A plain number is the standard orange urethane element with imperial capscrews. Suffixes change material or hardware: HDY is Heavy Duty Yellow, HSU the green hydrolytically stable urethane, M metric capscrews (7300035M is an E30M), BS a stainless steel bolt set (7300020BS) and J an anti-corrosion shoe coating. They combine, so 7300030HSUJBS is an E20 HSU element with stainless capscrews and coated shoes. Regal Rexnord's catalog also lists every element by an eight digit item number (E5 is 10287333), which appears on the box label and in our product descriptions.
Do I have to remove the hubs or realign the equipment to replace an Omega element? This product
No. Omega is a split-in-half tire coupling, so each element comes as two halves that bolt radially onto the hubs. You unbolt the worn halves and fit the new ones with the hubs left on the shafts, and Rexnord states there is no need to realign the equipment. Radial bolting also gives easier access than axially bolted couplings in confined spaces. The polyurethane is bonded to the metal shoes, so there is no clamped insert to slip. Tighten the capscrews to the dry torque in Rexnord installation manual 80152 (for example 360 lb-in for sizes 20 to 50) and do not lubricate them.
Should I choose the orange, Heavy Duty Yellow (HDY) or green HSU Omega element? This product
Orange is Rexnord's general purpose element with the highest misalignment capacity. HDY (Heavy Duty Yellow) is for drives that need a higher torque rating or higher torsional stiffness in the same footprint: it carries 25% more torque than the same size in orange, so you do not need to step up a size, but Rexnord limits it to 2 degrees angular and 1/32 in parallel misalignment. HSU (green, hydrolytically stable urethane) is made for hot and humid conditions and for applications that need chemical resistance, and HSU-J adds an anti-corrosive shoe coating with stainless hardware. All three fit the same hubs, so you can switch material on an existing coupling. They share the E sizes: 7300020 is an orange E5, 7300020HDY the HDY E5.
Which Omega hub do I need, and do close-coupled and spacer elements use different hubs? This product
Omega hubs are shared between close-coupled (E) and spacer (ES and ES-R) elements, which cuts the hubs you need to stock. Rexnord's hub codes are HRB for a rough stock bore you machine to size, HSB for a finished stock bore (7300310 is a size 5 HSB with a 1.000 in bore), HCB for a custom bore and keyway, HTL for a Taper-Lock bushing and HQD for a QD (Quick Detachable) bushing, bushing not included. In our numbering M1 marks a metric hub (7300480M1 is a 15M HRB) and SS stainless (7300670SS). Hubs come in carbon steel, 303 or 304 stainless, or electroless nickel plated for corrosive duty.
Does a Rexnord Omega element come with hubs and bolts? This product
An Omega element comes with its mounting capscrews but not the hubs. Hubs, elements and spare capscrew sets are all sold separately by catalog part number, with hubs ordered by size and bore. The two halves of an element are weight matched, so fit halves from the same box (standard balance is ISO G16 at 1504 RPM and AGMA Class 8). The capscrews have self-locking patches and should not be reused more than twice, so keep a spare capscrew set if you change elements often: 7301500 is a carbon steel metric M12 x 1.75 x 25 kit of 16 for sizes 60M, 70M and 80M.
Mechanic
Verified · SKU 492145Great service and fast shipping and great quality of product. Read more
Good orice
Verified · SKU 495479This stump grinder wheel bearing is expensive and I need two each time I change them. Best price I found anywhere and free shipping here at MRO Supply Read more
Great service-fast shipping
Verified · SKU 1303956Awesome service. I would highly recommend doing business with MRO! Price was cheapest anywhere Read more
Rexnord idler pulley
Verified · SKU 523062Great pricing and fast shipping A +++++++++ Read more