Shafting 227 Items
Description: Shafting is a method of transmitting torque using tubular or solid shafts that cam support reverse banding. The main difference between axle and shafts is that the latter can rotate to transmit power that is subjected to fatigue. However, axle is only a cantilever beam that is not subjected to fatigue. Shafting can use different methods of transmitting torque. For example, it utilizes pulleys, sprockets and gears. To keep these elements rigid and reduce vibrations during shafting, shafts are designed with grooves such as key seats. The cross-section design of the shafts in use can also be changed to reduce vibrations. The construction of the shafts has to factor the layout features as well as the components that will be mounted on the shaft. This means that the selected shaft for your system should have allowable tolerances, deflection, and manufacturing constraints. Your system shafting should be designed to avoid operating at critical speeds. This requirement is achieved by providing sufficient lateral rigidity. If the shafting is experiencing torsional fluctuations, it is prudent to ensure that the torsional natural frequencies are significantly different from torsional input frequency. To achieve optimal shafting efficiency, it is important to ensure that you have the right shafts and install them properly. It is also important to ensure that all the moving parts are maintained well, and the entire transmission system is effective. Power transmission engineers also recommend that the shafts are checked properly for wear and tear. When damaged, consider replacing the shafts or upgrading to stronger and more effective designs.