View cart
Add products to your shopping cart

Image for Illustration purposes only. Actual product may vary

  • BRAND:
  • SKU: 347157
  • MODEL: 2BK80118

TBWOODS 2BK80118 2BK80/2HB77 1 1/8 FHP SHEAV

$121.37 Each


  • Typically ships in: 1 day
  • Weight: 7.7 lb
  • Free shipping on orders over $20

Select Quantity

Additional Description

FamilyFHP Bored-to-size
Material TypeCI
Arm Thickness Hub in0.37500
Arm Thickness Rim0.3750
Arm Width Hub in1.0625
Arm Width Rim0.9375
Bead Thickness Hub in0.375
Bead Thickness Rim0.375
Bore To Size Bore Diameter1.1250
Bore To Size Keyseat1/4 x 1/8
Component Weight lbs7.7
Datum Diameter7.4
Face Width in1.75
Family ID2,000
Family NameV-Belt Sheaves and Pulleys
Hub Diameter in2.5
Hub Length in1.594
Inside Diameter in7.25
K Hub Location in-0.34
Material Class30
Number Arms6
Number Of Grooves2
Outside Diameter in7.75
Parting Line0.8750
Pitch Diameter in7.81
RPM Lower Limit490
RPM Upper Limit3,230
Sales Drawing 2D2BK80118
Wr2 lbs ft20.42
belt section 02B

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.


3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 


Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.


Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.


Product's availability

State of California Proposition 65 Product Warning