Categories

Add products to your shopping cart

#347443

AK7415/16

Image for Illustration purposes only. Actual product may vary

  • Brand:
  • Model: AK7415/16
  • Condition: NEW
  • SKU: 347443

TBWOODS AK7415/16 AK74X15/16 FHP SHEAV

View additional description
  • Typically ships in: 1 day
  • Weight: 4.1 lb
  • Contact supplier for technical support on: 888-829-6637
  • MOQ: 2

$52.06 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Additional Description

Specifications
UPC698672150071
FamilyFHP Bored-to-size
Material TypeCI
Arm Thickness Hub in0.37500
Arm Thickness Rim0.3750
Arm Width Hub in0.8750
Arm Width Rim0.7500
Bead Diameter Rim5.75
Bead Thickness Hub in0.375
Bead Thickness Rim0.375
Bore To Size Bore Diameter0.9375
Bore To Size Keyseat1/4 x 1/8
BushingNone
Component Weight lbs4.1
Datum Diameter7.0
DescriptionAK74
Face Width in0.75
Family ID2,000
Family NameV-Belt Sheaves and Pulleys
Hub Diameter in2.5
Hub Length in1.469
Inside Diameter in6.88
K Hub Location in-0.72
MaterialCI30
Material Class30
Number Arms6
Number Of Grooves1
Outside Diameter in7.25
Parting Line0.3750
Pitch Diameter in7.25
RPM Lower Limit520
RPM Upper Limit3,450
Type3
Wr2 lbs ft20.14
belt section 02A
Reviews

SKU: 832766

Didn’t use yet

I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.

Read more

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html

3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 

--

Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf

Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.

 

Product's availability

State of California Proposition 65 Product Warning