Categories

Add products to your shopping cart

#345714

2BK45

Image for Illustration purposes only. Actual product may vary

  • Brand:
  • Model: 2BK45
  • Condition: NEW
  • SKU: 345714

TBWOODS 2BK45 2BK45-QT/2BK45-H FHP SHEAVE

  • Typically ships in: 1 day
  • Weight: 3.1 lb
  • Contact supplier for technical support on: 888-829-6637

$62.98 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Additional Description

Specifications
UPC698672200882
FamilyFHP QT Bushed
Material TypeCI
BushingQT
Bushing Torque Rating1,750.00
Component Weight lbs3.1
Datum Diameter3.9
Description2BK45-QT
Face Width in1.75
Family ID2,000
Family NameV-Belt Sheaves and Pulleys
Hub Length in0.875
Inside Diameter in2.50
MaterialCI30
Material Class30
Max Stock Diameter Dec in0.4375
Max Stock Diameter Frac in0.437500
Max Stock Diameter mm14
Min Stock Diameter Dec in1.5000
Min Stock Diameter Frac in1.500000
Min Stock Diameter mm38
Number Of Grooves2
Outside Diameter in4.25
Parting Line0.8750
Pitch Diameter in4.31
RPM Lower Limit890
RPM Upper Limit5,890
Sales Drawing 2D2BK45
Torque Limit1,750
Type1
Wr2 lbs ft20.05
belt section 02B

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html

3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 

--

Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf

Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.

 

Product's availability

State of California Proposition 65 Product Warning