Categories

Add products to your shopping cart
Free shipping
#347111
BK130

Image for Illustration purposes only. Actual product may vary

  • BRAND:
  • SKU: 347111
  • CONDITION: NEW
  • MODEL: BK130

TBWOODS BK130 BK130-QT/BK130-H FHP SHEAVE

$94.53 Each

NEW

  • Typically ships in: 1 day
  • Weight: 7.3 lb
  • Contact supplier for technical support on: 888-829-6637
  • Free shipping on orders over $20
  • Contiguous U.S. States

Select Quantity

Additional Description

Specifications
UPC698672200561
FamilyFHP QT Bushed
Material TypeCI
Arm Thickness Hub in0.43750
Arm Thickness Rim0.4375
Arm Width Hub in1.1250
Arm Width Rim1.0625
Bead Thickness Hub in0.438
Bead Thickness Rim0.438
BushingQT
Bushing Torque Rating1,750.00
Component Weight lbs7.3
Datum Diameter12.4
DescriptionBK130-QT
Face Width in0.88
Family ID2,000
Family NameV-Belt Sheaves and Pulleys
Hub Diameter in2.75
Hub Length in0.875
Inside Diameter in11.00
K Hub Location in-0.06
MaterialCI30
Material Class30
Max Stock Diameter Dec in0.4375
Max Stock Diameter Frac in0.437500
Max Stock Diameter mm14
Min Stock Diameter Dec in1.5000
Min Stock Diameter Frac in1.500000
Min Stock Diameter mm38
Number Arms6
Number Of Grooves1
Outside Diameter in12.75
Parting Line0.4375
Pitch Diameter in12.81
RPM Lower Limit290
RPM Upper Limit1,970
Sales Drawing 2DBK130
Torque Limit1,750
Type3
Wr2 lbs ft21.16
belt section 02B

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html

3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 

--

Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf

Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.

 

Product's availability

State of California Proposition 65 Product Warning