Categories

Add products to your shopping cart

#345534

5V859

Image for Illustration purposes only. Actual product may vary

  • Brand:
  • Model: 5V859
  • Condition: NEW
  • SKU: 345534

TBWOODS 5V859 5V8.5X9-E ULTRA-V SHV

  • Typically ships in: 1 day
  • Weight: 33.0 lb
  • Contact supplier for technical support on: 888-829-6637

$323.18 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Additional Description

Specifications
UPC698672060479
FamilyNarrow
Material TypeCI
BalanceStandard, 1 plane
BushingE
Bushing Torque Rating20,000.00
Catalog E1.5938
Catalog L2.625
Catalog M2.28125
Component Weight lbs33
Datum Diameter8.5
Description5V8.5X9-E
Dynamic Balance RPM2,085
Face Width in6.50
Family ID2,000
Family NameV-Belt Sheaves and Pulleys
Hub Length in1.625
Inside Diameter in6.63
K Hub Location in2.50
MaterialCI30
Material Class30
Max Stock Diameter Dec in3.5000
Max Stock Diameter Frac in3.500000
Max Stock Diameter mm80
Min Stock Diameter Dec in0.8750
Min Stock Diameter Frac in0.875000
Min Stock Diameter mm35
Number Of Grooves9
Outside Diameter in8.50
Pitch Diameter in8.50
RPM Lower Limit440
RPM Upper Limit2,950
Torque Limit20,000
Type1
Wr2 lbs ft22.71
belt section 025V

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html

3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 

--

Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf

Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.

 

Product's availability

State of California Proposition 65 Product Warning