Add products to your shopping cart



Image for Illustration purposes only. Actual product may vary

  • Brand:
  • Model: 8V63012
  • Condition: NEW
  • SKU: 345601


View additional description
  • Typically ships in: 1 day
  • Weight: 1585.0 lb
  • Contact supplier for technical support on: 888-829-6637

$11,415.73 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Additional Description

Material TypeCI
Arm Section Modulus Zx18.00
Arm Section Modulus Zy9.00
Arm Thickness Hub in3.00000
Arm Thickness Rim2.7500
Arm Torque514,768
Arm Width Hub in6.0000
Arm Width Rim5.0000
BalanceStandard, 1 plane
Bead Diameter Hub in18.21
Bead Diameter Rim59.28
Bead Thickness Hub in3.000
Bead Thickness Rim2.750
Bushing Torque Rating375,000.00
Catalog E0.6250
Catalog L11.375
Catalog M1.87500
Component Weight lbs1585
Datum Diameter63.0
Dynamic Balance RPM524
Face Width in13.88
Family ID2,000
Family NameV-Belt Sheaves and Pulleys
Hub Diameter in15.75
Hub Length in9.000
Inside Diameter in59.69
K Hub Location in2.88
Material Class35
Max Stock Diameter Dec in7.2500
Max Stock Diameter Frac in7.250000
Max Stock Diameter mm0
Min Stock Diameter Dec in4.2500
Min Stock Diameter Frac in4.250000
Min Stock Diameter mm0
Number Arms6
Number Of Grooves12
Outside Diameter in63.00
Parting Line6.9375
Pitch Diameter in63.00
RPM Lower Limit60
RPM Upper Limit400
Sheave Torque Rating514,800
T1 T2 N16,341.80
Torque Limit375,000
Wr2 lbs ft26,830.00
belt section 028V

SKU: 832766

Didn’t use yet

I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.

Read more

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.


3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 


Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.


Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.


Product's availability

State of California Proposition 65 Product Warning