Image for Illustration purposes only. Actual product may vary
- Brand: TB Woods
- Model: 647B
- Condition: NEW
- SKU: 344873
TBWOODS 647B 6.4X7B-SF CONV SHEAVEView additional description
- Typically ships in: 1 day
- Weight: 17.2 lb
- Contact supplier for technical support on: 888-829-6637
Unit of measure: each
Returnable: See conditions
|Balance||Standard, 1 plane|
|Bushing Torque Rating||11,000.00|
|Component Weight lbs||17.2|
|Dynamic Balance RPM||2,544|
|Face Width in||5.50|
|Family Name||V-Belt Sheaves and Pulleys|
|Hub Length in||1.250|
|Inside Diameter in||5.06|
|K Hub Location in||1.81|
|Max Stock Diameter Dec in||2.9375|
|Max Stock Diameter Frac in||2.937500|
|Max Stock Diameter mm||65|
|Min Stock Diameter Dec in||0.5000|
|Min Stock Diameter Frac in||0.500000|
|Min Stock Diameter mm||28|
|Number Of Grooves||7|
|Outside Diameter in||6.75|
|Pitch Diameter in||6.81|
|RPM Lower Limit||560|
|RPM Upper Limit||3,710|
|Wr2 lbs ft2||0.88|
|belt section 02||A-B|
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.Read more
Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.