Categories

Add products to your shopping cart

#346810

1107B

Image for Illustration purposes only. Actual product may vary

  • Brand:
  • Model: 1107B
  • Condition: NEW
  • SKU: 346810

TBWOODS 1107B 11.0X7B-E CONV SHEAVE

View additional description
  • Typically ships in: 1 day
  • Weight: 42.0 lb
  • Contact supplier for technical support on: 888-829-6637

$427.73 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Additional Description

Specifications
UPC698672022835
FamilyClassical
Material TypeCI
BalanceStandard, 1 plane
BushingE
Bushing Torque Rating20,000.00
Catalog E1.0938
Catalog L2.625
Catalog M1.78125
Component Weight lbs42
Datum Diameter11.0
Description11.0X7B-E
Dynamic Balance RPM1,962
E Dimension in0.06
Face Width in5.50
Family ID2,000
Family NameV-Belt Sheaves and Pulleys
Hub Diameter in6.5
Hub Length in1.625
Inside Diameter in9.63
K Hub Location in2.00
MaterialCI30
Material Class30
Max Stock Diameter Dec in3.5000
Max Stock Diameter Frac in3.500000
Max Stock Diameter mm80
Min Stock Diameter Dec in0.8750
Min Stock Diameter Frac in0.875000
Min Stock Diameter mm35
Number Of Grooves7
Outside Diameter in11.35
Parting Line2.8125
Pitch Diameter in11.41
RPM Lower Limit330
RPM Upper Limit2,210
Sheave Torque Rating181,800
Torque Limit20,000
Type2
Web Thickness0.750
Web Torque181,734
Wr2 lbs ft25.95
belt section 02A-B
Reviews

Didn’t use yet

I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.

Read more

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html

3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 

--

Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf

Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.

 

Product's availability

State of California Proposition 65 Product Warning