Categories

Add products to your shopping cart

#347628

564C

Image for Illustration purposes only. Actual product may vary

  • Brand:
  • Model: 564C
  • Condition: NEW
  • SKU: 347628

TBWOODS 564C 5.6X4C-SD CONV SHEAVE

  • Typically ships in: 1 day
  • Weight: 13.3 lb
  • Contact supplier for technical support on: 888-829-6637

$189.83 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Additional Description

Specifications
UPC698672030182
FamilyClassical
Material TypeCI
BalanceStandard, 1 plane
BushingSD
Bushing Torque Rating5,000.00
Catalog E0.9375
Catalog L1.813
Catalog M1.62500
Component Weight lbs13.3
Datum Diameter5.6
Description5.6X4C-SD
Dynamic Balance RPM3,025
Face Width in4.38
Family ID2,000
Family NameV-Belt Sheaves and Pulleys
Hub Length in1.250
Inside Diameter in3.88
K Hub Location in1.56
MaterialCI30
Material Class30
Max Stock Diameter Dec in2.0000
Max Stock Diameter Frac in2.000000
Max Stock Diameter mm42
Min Stock Diameter Dec in0.4375
Min Stock Diameter Frac in0.437500
Min Stock Diameter mm24
Number Of Grooves4
Outside Diameter in6.00
Pitch Diameter in6.00
RPM Lower Limit630
RPM Upper Limit4,170
Torque Limit5,000
Type1
Wr2 lbs ft20.48
belt section 02C

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html

3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 

--

Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf

Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.

 

Product's availability

State of California Proposition 65 Product Warning