Categories

Subtotal

View cart
Add products to your shopping cart
#344757

Image for Illustration purposes only. Actual product may vary

  • BRAND:
  • SKU: 344757
  • CONDITION: NEW
  • MODEL: 13012D

TBWOODS 13012D 13.0X12D-M CONV SHEAVE

$2,471.05 Each

NEW

  • Typically ships in: 1 day
  • Weight: 210.0 lb
  • Free shipping on orders over $20

Select Quantity

Additional Description

Specifications
UPC698672040242
FamilyClassical
Material TypeCI
BalanceStandard, 1 plane
BushingM
Bushing Torque Rating125,000.00
Catalog E3.4688
Catalog L6.750
Catalog M7.34375
Component Weight lbs210
Datum Diameter13.0
Description13.0X12D-M
Dynamic Balance RPM1,003
Face Width in17.56
Family ID2,000
Family NameV-Belt Sheaves and Pulleys
Hub Length in5.188
Inside Diameter in10.75
K Hub Location in4.94
MaterialCI35
Material Class35
Max Stock Diameter Dec in5.5000
Max Stock Diameter Frac in5.500000
Max Stock Diameter mm120
Min Stock Diameter Dec in1.9375
Min Stock Diameter Frac in1.937500
Min Stock Diameter mm80
Number Of Grooves12
Outside Diameter in13.60
Pitch Diameter in13.60
RPM Lower Limit280
RPM Upper Limit1,840
Torque Limit125,000
Type1
Wr2 lbs ft242.00
belt section 02D

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html

3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 

--

Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf

Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.

 

Product's availability

State of California Proposition 65 Product Warning