Categories

Add products to your shopping cart

#344800

17012D

Image for Illustration purposes only. Actual product may vary

  • Brand:
  • Model: 17012D
  • Condition: NEW
  • SKU: 344800

TBWOODS 17012D 17.0X12D-M CONV SHEAVE

View additional description
  • Typically ships in: 1 day
  • Weight: 289.0 lb
  • Contact supplier for technical support on: 888-829-6637

$3,184.91 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Additional Description

Specifications
UPC698672041089
FamilyClassical
Material TypeCI
BalanceStandard, 1 plane
BushingM
Bushing Torque Rating125,000.00
Catalog E3.4688
Catalog L6.750
Catalog M7.34375
Component Weight lbs289
Datum Diameter17.0
Description17.0X12D-M
Dynamic Balance RPM882
E Dimension in0.78
Face Width in17.56
Family ID2,000
Family NameV-Belt Sheaves and Pulleys
Hub Diameter in10.5
Hub Length in5.188
Inside Diameter in14.75
K Hub Location in4.94
MaterialCI35
Material Class35
Max Stock Diameter Dec in5.5000
Max Stock Diameter Frac in5.500000
Max Stock Diameter mm120
Min Stock Diameter Dec in1.9375
Min Stock Diameter Frac in1.937500
Min Stock Diameter mm80
Number Of Grooves12
Outside Diameter in17.60
Parting Line8.0000
Pitch Diameter in17.60
RPM Lower Limit210
RPM Upper Limit1,430
Sheave Torque Rating704,900
Torque Limit125,000
Type2
Web Thickness1.875
Web Torque704,893
Wr2 lbs ft295.80
belt section 02D
Reviews

SKU: 832766

Didn’t use yet

I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.

Read more

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html

3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 

--

Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf

Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.

 

Product's availability

State of California Proposition 65 Product Warning