Call (888)-671-2883
 on most items
Text message to Live Chat! (201) 898 - 2676

145 1/2 PULLEY

BRAND: LoveJoy | MODEL: 68514418523 | CONDITION: NEW | SKU: 1798783
145 1/2 PULLEY

Image for Illustration purposes only,
Actual product may vary
Typically In Stock: confirm availability
Returnable: see conditions
Shipping from?: see locations Typically ships in 1 day
Weight: 2.25 lbs UOM: EA

Additional Description

Technical Specifications

Width 1.380 in
Bore 1/2 in
OD 4.50 in



Two-Side Moveable
1/3 through 1-1/2 HP
“A” and “B” Belts
      Aluminoline variable speed pulleys are designed for the best possible belt alignment with the least amount of overhung load. Flanges are made of a lightweight, corrosion-resistant aluminum, which is hard-coat anodized for long life. The aluminum flanges provide quiet operation with minimum vibration. These pulleys are used with classical “A” and “B” drive belts. Aluminoline pulleys offer maximum service when lubricated through a convenient grease fitting located on the end of the pulley shaft.
    Belt Selection
      Aluminoline variable speed pulleys are designed to drive standard “A” and “B” section belts. Due to the intermeshing flange design, it is best to use a wrapped belt or one without cogs.
    Adjustable Center Drives
      The typical adjustable center drive consists of the Aluminoline pulley mounted on the motor shaft, a companion sheave on the driven shaft, an adjustable motor base and a belt. Standard “A” and “B” fixed diameter sheaves should be used as driven companion sheaves. Belt alignment will be maintained throughout the speed range because the Aluminoline pulleys are two-side moveable. Due to the minimal bottom contact area of “A” and “B” belts, flat driven sheaves are NOT recommended.
Description 145 1/2 PULLEY
Drive TypeAdjustable Center - Driver
Belt SizeA
Weight2.25 lb
UPC Number18523
Dimensional Data
Bore Diameter 1/2 in
Keyway Size 1/8 x 1/4 in
Width1.380 in35.05 mm
Outside Diameter4.5 in
Max. Pitch Diameter (Dimension PD)4.250 in
Min. Pitch Diameter (Dimension PD)2.100 in
Overall Length4.810 in122.17 mm
Cubic inches97.40250 in³
Performance Data
Torque Capacity18.00 in·lb
Motor Power at 1,150 rpm0.30 hp
Motor Power at 1,750 rpm0.50 hp
  • Ratings for 1/3 through 1-1/2 HP motors
  • Unique “intermeshing” flange design
  • Greater speed ratios (up to 2.75 to 1) with a narrow-belt adjustable center drive than any other pulley