Call (888)-671-2883
 on most items
Text message to Live Chat! (201 TXT-2MRO)

LoveJoy 68514420138 M-1 3/4 PULLEY

BRAND: LoveJoy | MODEL: 68514420138 | CONDITION: NEW | SKU: 1798929
LoveJoy 68514420138 M-1 3/4 PULLEY

Image for Illustration purposes only,
Actual product may vary
Typically In Stock: confirm availability
Returnable: see conditions
Shipping from?: see locations Ships in 1 day
Weight: 15.04 lbs UOM: EA

Additional Description



Wide Variable Speed Belts
1/3 through 15 HP
      Pulleys in the WB series use wide variable speed belts for the most efficient transmission of torque through the widest possible speed range. These pulleys are two-side moveable for the best possible belt alignment when used with a grooved companion sheave. However, the location of the belt centerline close to the bore end of the pulley reduces the overhung load on motor bearings and seals. Precision-calibrated springs maintain correct pressure, keeping the belt properly tensioned and minimizing belt slip. WB pulleys can be used on both adjustable and fixed center drives. They offer maximum service when lubricated through a convenient grease fitting and occasionally run through the speed range.
    Belt Selection
      WB pulleys offer optimum speed ratios because they are used with wide variable speed belts. Pulley flanges are designed to match standard belt angle and width, so each pulley model must be matched to the correct belt to insure full speed range and maximum torque capacity.
    Adjustable Center Drives
      The typical adjustable center drive consists of: the WB pulley mounted on the motor shaft; a grooved companion sheave mounted with a bushing on the driven shaft; an adjustable motor base; and a variable speed belt. A wide range of pulley sizes and horsepower ratings are available from the WB series to fit the system requirements, and Lovejoy offers the correct drive belt, companion sheave, bushing, and motor base to complete the package.
    Fixed Center Drives
      Fixed center, or compound, drives offer greater driven speed ranges in a compact space. A fixed center drive consisting of a WB spring-loaded pulley and an adjustable pulley to match offers the best possible package for “C” mount configurations where zero offset is critical. Zero offset means that the driver and driven units are in line with one another, and the driven pulley is mounted in such a way that the belt rides as close as possible to the driven unit. This reduces overhung load and provides a smoother running drive. Three WB fixed center drive packages are available, from 1/3 through 3 HP.
Description M-1 3/4 PULLEY
Drive TypeFixed Center - Driver
Belt Size1922V
Weight15.04 lb
UPC Number20138
Dimensional Data
Bore Diameter 3/4 in
Overall Width1.560 in
Outside Diameter (Dimension C)7.500 in
Max. Pitch Diameter (Dimension PD)7.280 in
Min. Pitch Diameter (Dimension PD)2.420 in
Overall Length9.500 in
Cubic inches534.37500 in³
Performance Data
Motor Power at 1,150 rpm0.75 to 1 hp
Motor Power at 1,750 rpm1 to 1.5 hp
  • Sizes range from 6 to 13 inches in diameter
  • Ratings to 15 HP
  • Made of durable cast iron flanges (if greater than 1 HP)
  • Lightweight, corrosion-resistant anodized aluminum flanges on Models 245 and 260
  • Precision balanced for smooth operation
  • 17 turns of hand wheel required for full speed range.