MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Grove Gear GR-HMQ852-80-H1-180-35 80:1 Ratio, 1.125" Input Diameter, 2.188" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer 80:1 Ratio, 1.125" Input Diameter, 2.188" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer
MODEL GR8520607.35
Contact supplier for technical support on: 888 378 6245
$5,661.34 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
HMQ-H1
Bore Code
35
Center Distance
5.2 In.
Center distance (in)
5.25
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Housing material
Cast iron
HP Range
2 HP to (< 3)HP
Input Bore (C Face)
1.125
Input Diameter (in)
1.125
Input Flange
182-4TC
Input HP
2.906
Input HP @ 1750 RPM
2.906
Input Keyway (C Face)
1/4 X 1/8
Input RPM
1750
Input Style
Quill
Max OHL (Output Shaft)
3590
Max Thrust Load (Output Shaft)
3412
Model Code
HMQ852
Motor Frame Size
180
Mounting Style
Shaft Mount
No. of Gear Reductions
Single
Output
Hollow
Output Diameter (in)
2.188
Output Hollow Shaft Diameter (in)
2.188
Output HP
1.902
Output Key
1/2 X 3.38
Output RPM
21
Output Shaft Assembly Code
H1
Output Shaft Direction
H1
Output Shaft Orientation
H1
Output Style
H1
Output Torque
5478
Output Torque (lb-in)
5478
Output Torque Range
5000 to 10000 in lbs
Output type
Hollow bore
Overhung Load Rating (Output Shaft(lb))
3590
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
80 to 1
Ratio Range
80-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-HMQ-H1
Service Factor
1
Shaft Seal Material
Viton
Size
180TC
Thrust Rating - output shaft
3412
Regal Beloit Grove Gear&Reg; GR8520607.35
UPC: 690310033227 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 80:1 Gear Ratio, 2.906 hp Input, 1.902 hp Output, C-Face Quill Input, Hollow Bore Output, 1-1/8 in Dia Input, 2.188 in Dia Output, 21.9 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 5478 in-lb Output, 5-1/4 in Centre Distance, 1/4 x 1/8 in Input, 0.5 x 3.38 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Cast Iron, 10-1/2 in W
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 21.9 rpm
- Centre Distance: 5-1/4 in
- Input Type: C-Face Quill
- Output Size: 2.188 in Dia
- Input Size: 1-1/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 5478 in-lb Output
- Horsepower: 2.906 hp Input, 1.902 hp Output
- Keyway Size: 1/4 x 1/8 in Input, 0.5 x 3.38 in Output
- Gear Ratio: 80:1
- Output Type: Hollow Bore
- Mounting Type: Shaft
- Dimensions: 10-1/2 in W
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Weight: 247.0 lb
Warranty:
Limited
| Brand | Hubbell Wiring |
| Model | HBL560C9W |