Image for Illustration purposes only. Actual product may vary
If you need to change the V-belts, the decision to go with cogged or synchronous depends on your preference. If you do not want to make modifications on your system, go for the cogged model. However, it is the synchronous system that guarantees the highest efficiency in the system in your facility.Read More
Alternatives 1 itemsProducts from another supplier. Note, it may not be identical in style or function to original item
|Category Name Description|| Reduce both acquisition costs and transaction costs by designing with PowerGrip GT3. The PowerGrip GT3 belt has two times the rating of competitive RPP belts, and its predecessors PowerGrip GT and HTD belts. PowerGrip GT3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip GT3 belts can be used as a direct replacement for most 8mm and 14mm pitch standard rubber RPP and HTD synchronous belts. |
|Features Advantages|| Fiberglass tensile cord provides high strength, excellent flex life, and high resistance to elongation. |
Nylon tooth facing provides a durable wear surface for long service life.
Gates patented tooth profile is designed for use with a specific sprocket groove profile. The sprocket groove-belt tooth combination increases capacity, while improving registration.
Eliminates lubrication and re-tensioning to reduce maintenance and labor as compared to roller chain drives.
PowerGrip GT3 ACHE belts are available in 14mm pitch. A single twist cord helps prevent the belt from moving downward on vertical shaft ACHE applications.
Neoprene body provides protection against grime, grease, oil, and moisture.
PowerGrip GT3 has more tooth ratchet resistance than HTD.
|Markets/Applications|| PowerGrip GT3 belts are suitable for many applications such as HVAC, textile, printing, machine tools, food processing, conveyors, packaging, agriculture, pumps, compressors, centrifuges, laundry, pulp and paper. |
|Belt / Sprocket Specifications|
|Number of Teeth|| 140 |
|Pitch Length (in)|| 44.09 |
|Recommended Sprockets|| PowerGrip GT2 Sprockets |
|Trademarks|| RPP is a Registered Trademark of Carlisle Power Transmission Products Inc. |
HT100 is a Registered Trademark of Reliance Electric.
|Belt Notes|| Belt pitch is the distance in millimeters between two adjacent tooth centers as measured on the pitch line of the belt. Belt pitch length is the total length (circumference) in millimeters as measured along the pitch line. The theoretical pitch line of a PowerGrip GT3 belt lies within the tensile member. |
PowerGrip GT3 part numbers are comprised of pitch, pitch length and width. For example; part number 3150-14MGT-55 denotes a 3150mm pitch length, 14mm pitch and 55mm width.
8M and 14M PowerGrip GT3 belts are conductive in accordance with ISO 9563. When belt drive systems are located in potentially hazardous environments, safe and reliable dissipation of electrostatic charges is critical - a secondary means of dissipation such as static grounding brushes is recommended.
|WARNING:|| New drive designs must use the PowerGrip GT2 sprockets, because of the high torque capacity of PowerGrip GT3 belts. |
Do NOT use HTD or RPP profile sprockets in new designs. PowerGrip GT3 belts can be used on existing HTD or HT100 sprockets as replacement belts, usually at the next narrowest width.
|Customer Pack|| 1.0 |
|Standard Pack|| 8 |
|Weight (Lbs.)|| 1.458 |
|Number of Teeth||140|
In order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.