Categories

Add products to your shopping cart

#351020

16H100

Image for Illustration purposes only. Actual product may vary

  • Brand:
  • Model: 16H100
  • Condition: NEW
  • SKU: 351020

TBWOODS 16H100 16H100-JA TIM PULLEY

View additional description
  • Typically ships in: 1 day
  • Weight: 0.8 lb
  • Contact supplier for technical support on: 888-829-6637
  • MOQ: 2

$58.00 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Additional Description

Specifications
UPC698672310024
Unit Of MeasureEnglish
FamilyTiming
Material TypeDI
Belt Width in1.00
BushingJA R
Const TypeS
Description16H100-JA
Face Width in1.31
Family ID2,004
Family NameSynchronous Sprockets
Hub Length in0.560
Inertia WR20.006
Inside Diameter in1.66
Number Of Teeth16
OD Outside Diameter in2.49
Pitch Diameter in2.55
Pitch M1/2in (H)
Rim Face1.31250
Rim ID1.66
RPM Upper Limit15,320
Section 01H
Tooth Pitch Frac in0.500000
Torque Limit1,750
Weight lbs0.8
Wr2 lbs ft20.01
Reviews

SKU: 832766

Didn’t use yet

I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.

Read more

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html

3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated. 

--

Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.

File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf

Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.

Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid. 

Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.

No products will be accepted for return or exchange if they are obsolete.

 

Product's availability

State of California Proposition 65 Product Warning