MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Gates 92461339 TP630XL037 PowerGrip Twin Power Timing Belts - Pitch: 1/5" (.200"/XL)
- Width: 3/8"
- Pitch Length: 63.00"
- Number of Teeth: 315
- Material ID: 92461339
Gates PowerGrip Twin Power Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronisation from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high ?exibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
- Fibreglass tensile cord provides high strength, excellent flex life, and high resistance to elongation.
- Neoprene body provides protection against grime, grease, oil and moisture.
- Belt capacity is equal to standard single-sided PowerGrip timing belts.
MODEL TP630XL037
This vendor has a minimum order quantity of 3. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 303-744-5800
$75.29 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Brand Minimum Order Quantity: 3
Typically Ships in: 1 day
Returnable: See conditions
Belt Back Side
Notched
Belt Height (in)
0.12
Color
Black
End
Endless
Fabric Material
Nylon Teeth
Material
Neoprene
Minimum Pulley Diameter
0.62 in
Number of teeth
315
Number of Teeth
285
Pitch
1/5 in (0.2 in)
Pitch Length
63 in
Reinforced Material
Fiberglass
Section
XL
Series
9246
Sided
Double Sided
Sprocket Comptab
PowerGrip GT
Standard Width
YES
Static Conductive
No
Temperature Range
-30 to 180 deg F
Tooth Profile
Trapezoidal Design
Type
Extra Light
Width
0.37 in
Gates PowerGrip Twin Power Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
- Fiberglass tensile cord provides high strength, excellent flex life, and high resistance to elongation.
- Neoprene body provides protection against grime, grease, oil, and moisture.
- Belt capacity is equal to standard single-sided PowerGrip timing belts.
WE'RE TAKING DOWN DOWNTIME.
Gates PowerGrip Twin Power Belts run quieter than roller chain drives and eliminate the need for lubrication and re-tensioning to reduce maintenance, downtime and labor in your operations.
Features and Benefits
- Gates Twin Power belts have nylon facing on both tooth surfaces to provide equal load carrying capabilities on either side of belt.
- Wear resistant nylon fabric on both tooth sides to provide equal load carrying capabilities on either side of belt.
- Temperature Range: -30°C to +100°C (-22°F to +212°F).
- Precision formed elastomeric teeth and body.
- Free of lubrication and maintenance.
- High efficiency, non-slip positive drive.
- High tooth jump resistance.
- Available in XL, L, H pitch.
GIVE YOUR APPLICATIONS 100% ON BOTH SIDES, WITHOUT COMPROMISE.
Twin Power can transmit up to 100% of its maximum rated load from either side of the belt; alternatively, it can transmit a load on both sides – provided the sum of the loads does not exceed the maximum capacity.
| Brand | Hubbell Wiring |
| Model | DSL30W1 |
| Brand | Gates Rubber |
| Model | 540L12 |
| Brand | Timken Belts |
| Model | 695L14 |
| Brand | Hubbell Wiring |
| Model | 03301001 |
| Brand | Orbit Industries |
| Model | 4RC-TS |
| Brand | ACME |
| Model | B2-700874 |
| Brand | Goulds |
| Model | GT10FRM |
| Brand | Gates Rubber |
| Model | AT5-545-100 |
In order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.