Image for Illustration purposes only. Actual product may vary
|Description||SE-G11 TENSIONER W/NEOPRENE, OIL RESISTANT|
|Mounting Bolt Size||M6 x 20|
|Outside Diameter (Dim D)||1.38 in|
|Overall Length (Dim E)||2.01 in35 mm|
|Idler Bolt Size||3/8 - 16 x 2|
|Dimension L||3.54 in90 mm|
|Dimension J-1||3.15 in80 mm|
|Dimension J-2||2.36 in60 mm|
|Dimension L1||20 mm|
|Dimension G||0.2 in5 mm|
|Dimension O||0.24 in6 mm|
|Dimension P||0.31 in8 mm|
|Dimension K||0.79 in20 mm|
|Cubic inches||9.81925 in³|
|Normal Temperature Range||-22 to 195 ºF-30 to 90 ºC|
|Mounting Bolt Torque||10 N·m89 in·lb|
|Force at 20° Angle of Pretension (Normal Force Level) (Dimension F)||9 lb40 N|
|Distance at 20° Angle of Pretension (Normal Force Level) (Dimension S)||1.1 in28 mm|
- The recommended angle of pretension is 20°. This provides the tensioner a maximum capability to absorb vibrations and shock loads, while also maintaining a range of motion to address the system’s belt or chain stretch.
- Mounting accessories into the “Hard” Position results in approximately 25% higher tensioning force over the “normal” position.
- Inch (imperial) standard tensioner units all come with both the mounting screw and a zinc-plated idler bolt with nuts.
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may applied to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/