Add products to your shopping cart
CC75

Image for Illustration purposes only. Actual product may vary

Gates CC75 CC Section Hi-Power II Double-V Belt

  • Top Width: 7/8"
  • Depth: 23/32"
  • Outer Length: 79"
  • Inner Length: 75"
  • Material ID: 90540075

Gates Hi-Power Double-V belt is designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt. Use this Gates solution for all industrial serpentine applications that require rotation reversal on some driven shafts. It uses flex-bonded tensile cords, which are highly resistant to flexing forces, and a protective Flex-Weave cover. It is the ideal solution for "serpentine" drives (drives with counter rotating shafts) where power is transmitted from both the top and the bottom of the belts.

  • Gates curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and"creased belt life.
  • Flex-Bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.

MODEL CC75

BRAND

SKU

1240067

WEIGHT

1.850 lb

UOM

each

This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum

Contact supplier for technical support on: 303-744-5800

$84.36 Each

Prices are subject to change

FREE SHIPPING ON ORDERS OVER $1

Select Quantity

GET A QUOTE

Orders over $500 qualify for a Free Gift

Brand Minimum Order Quantity: 2

Typically Ships in: 1 day

Returnable: See conditions

Still Deciding?

Add this item to your saved items and easily come back later.

Top width

7/8 in

Cogged

No

Section

CC

Depth

11/16 in

Top width (per rib)

7/8 in

Depth (per rib)

11/16 in

Number ribs

1

outside length

79.2 in

Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.

  • Gates Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life. Fully wrapped construction, eliminates debris and dust concerns found in competitive double notch belts.
  • Flex-Bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration. Flex-Weave oil and heat resistant cover protects the belt core from the toughest environments.
  • Ideal solution for "serpentine" drives (drives with counter rotating shafts) where power is transmitted from both the top and the bottom of the belts.
  • Field tests prove Gates belts run 3-6 months and more compared to similar competitor belts that last only 1-3 weeks. All sizes meet Gates V80 system matching tolerances.
  • Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements.REACH and RoHS 2 compliant.
THIS IS HI-POWER II, ON THE DOUBLE

The Gates Hi-Power II Dubl-V Belts are engineered with all the characteristics of Gates Hi-Power Belts, including the composite, multi-purpose construction and resistance in tough operating environments, with a two-belt Dubl-V construction for added stability and durability on your serpentine drives with one or more reverse bends.

Features and Benefits
  • The Flex-Weave cover is a patented construction for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat.
  • Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX.
  • Match system: All sizes meet Gates UNISET tolerances, they can be installed without matching.
  • Meets RMA oil and heat resistant standards and static conductivity requirements.
  • Dubl-V belts are available in AA, BB, CC and DD cross sections.
  • Hi-Power Dubl-V DD not included in UNISET tolerances.
  • Temperature Range: -30°C to +60°C (-22°F to +140°F).
  • Lower transmission from both sides of the belt.
  • Suitable for dirty/dusty environments.
A FORCE TO BE FLEXED WITH.

The Flex-bonded cords, supported by our patented, highly protective Flex-Weave cover, work together to create a strong, durable double-v profile belt with an extreme resistance to damaging flexing forces.

SKU: 1251850

Gates rubber 84000160

Good product at a great price

Read more

SKU: 5054808

Belt puller

Nice product, thank you.

Read more

SKU: 5932923

Great price on gates belt

Great price and fairly quick shipping.

Read more

SKU: 1245113

Great belts

Bought these for my lathe. They are much better made than the original. MROSupply charges a very competitive price and the packaging and shipping speed was great.

Read more
Alternatives Products from another supplier. Note, it may not be identical in style or function to original item
CC75

#833886

Brand

TB Woods

Model

CC75

$90.00 Each
Free Shipping orders over $1
CC75

#676609

Brand

Bando

Model

CC75

$40.81 Each
Free Shipping orders over $1
CC75

#2243422

Brand

Bestorq

Model

CC75

$44.90 Each
Free Shipping orders over $1
CC75

#2017698

Brand

Carlisle PT

Model

CC75

$73.52 Each
Free Shipping orders over $1

When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.

$500

MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug

$750

32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up

$1,250

Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat

$2,500

Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat

$5,000

Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1

$7,500

GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket

Return policy

In order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order.  Made To Order items are Non-Returnable and Non-Cancellable.