Image for Illustration purposes only. Actual product may vary
|Category Name Description|| The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. |
|Features Advantages|| Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration. |
Meets ARPM / RMA IP-3-2 oil and heat-resistant standards.
Meets ARPM / RMA IP-3-3 static conductivity requirements.
Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves.
The Tie Band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive.
Patented Ethylene Material construction provides -60°F to +250°F temperature range to resist belt cracking.
|Markets/Applications|| Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over or jump off the drive. |
|Size Range/Availability|| Large Inventory of standard lengths and widths are readily available. See sizing table for details. |
Belt Slitters located onsite at several Gates Service Centers can cut down an existing belt in inventory to the strand width needed.
|Belt / Sprocket Specifications|
|Outside Circumference (in)|| 125.00 |
|Recommended Sheaves|| Super HC Sheaves |
|Belt Notes|| Belt product number is 8 or 9 digits constructed of product series prefix, number of strands, and belt length. For example, 93885080 represents a "3VX" section PowerBand (9388) with 5 strands (5) that is 80.0 inches (080) long. |
Belt part number is constructed by placing the (#) number of strands required followed by a slash (/) in front of the belt size. For example, 5/3VX800 represents a 3VX800 with 5 joined strands.
|Standard Pack|| 1 |
|Weight (Lbs.)|| 26 |
In order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.