We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Gates 93888090 8/3VX900 Super HC Molded Notch PowerBand Belts - Cross Section: 3VX
- Strands: 8
- Sectional Top Width: 3/8"
- Total Top Width: 3"
- Depth: 21/64"
- Outside Circumference: 90.00"
- Material ID: 93888090
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
- Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Patented Ethylene (EPDM) Material construction provides -51C to +121C (-60F to +250F) temperature range to resist belt cracking.
- The Tie Band assures high lateral rigidity, guiding the belt" a straight line and preventing it from coming off the drive.
- Meets RMA oil and heat resistant standards and static conductivity requirements.
MODEL 8/3VX900
Contact supplier for technical support on: 303-744-5800
$433.27 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Angle
38
Belt Back Side
Smooth
Belt Inside
Notched
Cogged
Yes
Color
Black
Construction
Bandless
Cord Material
Polyester
Depth
21/64 in
Depth (per rib)
21/64 in
Effective Length (in)
89.81
Material
EPDM
Minimum Pulley Diameter
3.82 in
Number ribs
8
Outside circumference (in)
90
outside length
90 in
Reinforced Material
Flex-Bonded Polyester
Section
3VX
Series
9388
Sided
Single Sided
Static Conductive
No
Temperature Range
-60 to 250 deg F
Thickness (in)
0.35
Top width
3/8 in
Top Width (in)
3.22
Top width (per rib)
3/8 in
Type
Heavy Duty Molded Notch
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
- Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Patented Ethylene (EPDM) Material construction provides -51°C to +121°C (-60°F to +250°F) temperature range to resist belt cracking.
- The Tie Band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive.
- Meets RMA oil and heat resistant standards and static conductivity requirements.
SKU: 1245032
Great parts
Found the belts I needed here at the best price available. very fast shipping, great service. will be doing business again. Thank you.
Read moreSKU: 1248999
Belt 5vx940
Excellent Speedy Service. TLC Will continue doing business with MRO.
Read moreSKU: 1245113
Great belts
Bought these for my lathe. They are much better made than the original. MROSupply charges a very competitive price and the packaging and shipping speed was great.
Read more
#2021886
Brand
Timken Belts
Model
R3VX900-8
SKU: 1245032
Great parts
Found the belts I needed here at the best price available. very fast shipping, great service. will be doing business again. Thank you.
Read moreSKU: 1248999
Belt 5vx940
Excellent Speedy Service. TLC Will continue doing business with MRO.
Read moreSKU: 1245113
Great belts
Bought these for my lathe. They are much better made than the original. MROSupply charges a very competitive price and the packaging and shipping speed was great.
Read moreIn order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.