We never sell your data to third parties
Toshiba VT130G9U435K G9 adjustable speed drive, 350 HP, 460V three-phase, 60 Hz. NEMA-1 enclosed frame. Part of the VT130 G9 series for industrial variable frequency drive applications.
MODEL VT130G9U435K
Contact supplier for technical support on: tic-dist1@toshiba.co
$33,157.32 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Typically Ships in: 1 day
Returnable: See conditions
Analog Inputs
3
Communication (On-Board)
Modbus-RTU
Control Method
V/f
Sensorless Vector
Closed Loop Vector
PM Motor
Depth
17.6 in
Display Type
LED/LCD
Enclosure rating (IP)
IP20
Enclosure rating (NEMA)
NEMA 1
Height
70 in
HP Rating (Normal Duty)
350
Input Amperage Rating (Normal Duty)
427
Input Phases
3
Nominal Drive Input Voltage
460VAC
Safe Torque Off (STO)
No
Series
G9 Series
Type
Low Voltage Severe-Duty
UL Listed
Yes
Width
25.6 in
The G9 adjustable speed drive is the most advanced severe duty drive ever offered by Toshiba. It is a blend of a robust power platform and a state-of-the-art control scheme. With its 115% continuous overload rating and its dual 32-bit processor controls, the G9 provides the ability to operate the toughest of applications while still maintaining a high level of control.
G9 Specifications |
||
| Model Range |
0.75 to 100HP |
1 to 350 HP |
| Voltage Rating |
200 to 240 V |
380 to 480 V |
| Input Voltage Tolerance | ±10% | |
| Voltage Regulation | Main Circuit Voltage Feedback Control (Automatic Regulation, 'Fixed' and 'Control Off' Selections) | |
| PWM Carrier Frequency | Adjustable 0.5 to 15 kHz (ASD Specific, Consult Factory) | |
| Control System | Sine Wave PWM System - Flux field current vector control | |
| V/f Pattern | Open Loop Vector, Closed Loop Vector, Constant Torque, Variable Torque, Auto Torque Boost, Manual Torque Boost, 5-Point V/f Custom Curve Setting | |
| Overload Current Rating | 115% Continuous and 150% for two Minutes (< or =100 HP/480V), 110% Continuous and 150% for one Minute (>100 HP/480V) | |
| Frequency Setting | Rotary Encoder Integrated into EOI, 0 to 10 V, ±10 V, 4 to 20 mA, Binary Input, Motorized Potentiometer Input | |
| Frequency Precision | Analog Input 0.2% of the Maximum Output Frequency, Digital Input 0.01% of the Maximum Output Frequency | |
| Output Frequency Range | 0 to 299 Hz | |
| Speed Regulation | Closed Loop (Up to 0.01%, 1000:1 Speed Range), Open Loop (Up to 0.1%, 60:1 Speed Range) | |
| Discrete Input Terminals | Eight Discrete Input Terminals Programmable to 67 Functions; Number of Terminals may be Increased Using Optional Hardware | |
| Analog Inputs | One 4-20 mA or 0-10Vdc isolated input, one 0-10Vdc input, and one +/- 10Vdc input | |
| Discrete Output Contacts | Three Output Contacts Programmable to 127 Functions | |
| Analog Outputs | One Programmable 4 to 20 mA or 0 to 10 V and One 4 to 20 mA Output | |
| Control Board Communication Ports | 2-Wire/4-Wire RS485 | |
| Power Terminals | Input (L1, L2, L3); Output (T1, T2, T3); DCL(PO,PA); Dynamic Breaking Resistor (PA,PB); DC BUS (PA, PC) | |
| Set Point Control (PID) | Proportional Gain, Integral Gain, Feedback Settings Upper/Lower Deviation Limits, Feedback Source Delay Filter, Feedback Settings Differential Gain | |
| Retry | Can be setup to clear resetable faults upon trip automatically. | |
| Restart | ASD will catch a coasting motor smoothly. | |
| Ambient | Operating Temperature: -10 to +40°C; 14 to 104°F Humidity: 95% Non-Condensing | |
| Installation | NEMA 1 Enclosure Type | |
|
Electronic Operation Interface (EOI) | ||
| LCD EOI (Liquid Crystal Display/Electronic Operator Interface) | Full English Back-Lit Display | |
| LED EOI | Light Emitting Diode; Seven Segment Display | |
| LED Indicators | Run (Red)/Stop (Green), Local/Remote (Green), DC Bus Charge Indicator (Red) | |
| Keys | Local/Remote, ESC, Run, Mode, Stop/Reset | |
| Rotary Encoder | Encoder with Integrated Enter Key for Frequency and Parameter Adjustments | |
| Monitoring | Main Display shows two monitored Items selectable from: Output Current, DC Voltage, Output Voltage, Run Time, Comp. Frequency, PID Feedback, Motor Overload, Motor Load, ASD Load, Input Power, Output Power, RR Input, VI/II input, RX Input, RX2 Input, AM Output, and FM Output. | |
| Selectable Display units | Completely Configurable along with Scaling Factor Multiple; Current Display Selectable Between Amps (A) or percentage of FLA (%); Voltage Display Selectable Between Volts or %. | |
| Brand | SKF Bearing |
| Model | NJ 307 ECM |
| Brand | INA Bearing |
| Model | VSU200414 |
