Image for Illustration purposes only. Actual product may vary
$1,909.53 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: Yes
Still Deciding?
Add this item to your saved items and easily come back later.
Connecting capacity supply circuit
Rigid 1 x 0.75 ... 2.5 mm²
Run signal relay
Yes
Initial voltage during start
40 ... 70 %
Rated control supply voltage
100 ... 240 V AC
Rated control circuit voltage
24 V DC
Product main type
PSR105
Connecting capacity control circuit
1 x 0.75 ... 2.52 x 0.75 ... 2.5 mm²Rigid 1 x 0.75 ... 2.5 mm²Rigid 2 x 0.75 ... 1.5 mm²
Function
Single direction
Connecting capacity main circuit
Rigid 1x 10 ... 95 mm²Rigid 2 x 6 ... 35 mm²
Ramp time
0 ... 20 second [unit of time]1 ... 10 second [unit of time]
Degree of protection
IP10
Fault signal relay
No
Tightening torque
Control Circuit 0.6 N·mMain Circuit 8 N·mSupply Circuit 0.6 N·m
Signal indication ramping up/down
Green
Signal indication running R
Green
Starting capacity at maximum rated current
4xIe for 6s
Rated operational voltage
208 ... 600 V AC
Integrated electronic overload
No
Overload signal relay
No
Current limit function
No
Rated operational power - in-line connection
(230 V) 30 kW(400 V) 55 kW(500 V) 55 kW
Adjustable rated motor current
No
Rated operational current - in-line connection
105 A
Signal indication ready to start/standby ON
Green
Service factor percentage
100.00%
Signal indication completed start ramp
Green
By-pass signal relay
Yes
Communication
FiledBusPlug(Optional)
Overload protection
Recommended MS495 80 ... 100
Switch for inside delta connection
No
Number of starts per hour at 3.5*Ie for 7 sec. 50% ON time 50% OFF time
10
Step down voltage special ramp
100 ... 60 %
The softstarter PSR105-600-70 has a rated maximum operational current of 105 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
