We never sell your data to third parties
Isostatic M7040TU steel-backed PTFE sleeve bearing, 70mm I.D. x 75mm O.D. x 40mm length. Maintenance-free dry running bushing with low-carbon steel backing, sintered bronze interlayer, and PTFE overlay. Suitable for applications requiring self-lubrication without oil or grease.
MODEL M7040TU
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 7732863444
$13.40 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable: See conditions
Bearing Material
Steel-Backed PTFE Lined
Bore
70 mm
Maximum Pressure
36250 psi
Maximum PV Rating
102000 psi/sq-ft/min
Maximum Velocity
1900 sfpm
O.D.
75 mm
Temperature Rating
-328 to 536 deg F
Type
Round Bore
Width
40 mm
Isostatic TU Sleeve Bearings
- Standard stock products
- Self-lubricating dry sliding bearing
- A steel-backed composite material comprised of:
- Low carbon steel backing allows for extremely high load capacity - thickness. 50 – 2. 7 mm
- Sintered bronze offers optimal heat dispersion – thickness. 20 -. 35 mm
- PTFE – lead sliding surface creates a low friction coefficient and allows for a wide temperature range – thickness. 02 mm
- Can be used where many liquid lubricants fail; also performs well with lubrication
- Ideal for heavy loads at moderate speeds or light loads at high speeds – max Pv 102, 000, P-Load 36, 250, V-SFM-1, 900
- Effective in temperature range of -328°F to +536°F
- Standard tolerances vary by size. See items for specific tolerances
- A lead free version is available on a made-to-order basis
- REACH, DFARS compliant
Specifications
| Detailed Description | 70 MM I. D. x 75 MM O. D. x 40 MM Length, TU, Steel Back, PTFE & Pb Lined Composite, Sleeve Bearing, Metric |
|---|---|
| Catalog Number | M7040TU |
| Interchange # | 7040DU MB7040DU PAP 7040 P10 |
| Unit of Measure | Each |
| Material | Steel-Backed PTFE Lined |
| Material Standard | Steel-Backed PTFE Lined |
| 0. 3730 lb | |
| UPC Code | 00846802069032 |
| Nominal Inner Diameter | 70 mm |
| Nominal Outer Diameter | 75 mm |
| Nominal Length | 40 mm |
| Recommended Shaft Size | 69. 940 to 69. 970 mm |
| Recommended Housing Bore | 75. 000 to 75. 030 mm |
| Overall Length Tolerance | ±. 25 mm |
| Load - P Max Value | 36, 250 lb/in² |
| Speed - V Max Value | 1, 900 ft²/min |
| Load at Speed - PV Max Value (P. S. I. / S. F. M. ) | 102, 000 |
SKU: 1382499
Sleeve for my gates
I got my sleeves, and they are working as intended for my gates.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Nord Gear |
| Model | 90SP/4 CUS BRE20 FHL SR TW RD SN 202322673-100 |
| Brand | Champion |
| Model | CS12X-5/16 |
| Brand | Regal Cutting Tools |
| Model | 073505MS |
SKU: 1382499
Sleeve for my gates
I got my sleeves, and they are working as intended for my gates.
Read more