We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Koyo 3NC6212ZZ is a 6200 series single-row deep groove ball bearing with a 60 mm straight bore. It features double steel shields and C3 internal clearance. Designed for general industrial rotating equipment such as electric motors, pumps, and fans.
MODEL 3NC6212ZZ
$580.07 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Material
Ceramic
Bore Diameter
60 mm
Closure Type
Non-Contact Double Shielded
Dynamic Load Capacity
65.6 kN
Maximum RPM
5700 rpm Grease
Number of Rows
1
O.D.
110 mm
Operating Temperature Range
-30 to 120 deg C
Series
EXSEV
Static Load Capacity
30.77 kN
Type
Cylindrical Bore
Width
22 mm
.
.Bearing races made from premium high carbon, high chromium Japanese steel
.Used for applications that require an insulated bearing to prevent electric arcing, marginally lubricated and/or higher speed applications
.Koyo Invented the Ceramic Hybrid Bearing- 3NC (ceramic balls and steel races)
.Made with the highest quality ceramic balls
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#5745207
Brand
Nachi Bearing
Model
SH6-6212ZZEC3
| Brand | Gates Rubber |
| Model | AT5-10-30M-LLUSHBNB |
| Brand | Coilhose |
| Model | H0402 |
