We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Koyo 5203 double-row angular contact ball bearing with a 17 mm bore, 40 mm outer diameter, and 17.5 mm width. Open type design for applications requiring high axial and radial load capacity in a compact space. Suitable for pumps, compressors, and gearboxes.
MODEL 5203
$28.09 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore
0.669 in / 17 mm
Brand
KOYO
Contact Angle
24 Degree
Flush Ground
No
Harmonized Tariff Code
8482.10.50.28
Inch - Metric
Metric
Internal Clearance
C0-Medium
Maximum Capacity / Filling Slot
No
Number of Bearings
1 (Single)
Number of Rows of Balls
Double Row
Outside Diameter
1.575 Inch / 40 Millimeter
Precision Class
ABEC 1 / ISO P0
Rolling Element
Ball Bearing
Snap Ring
No
Type
Angular Contact Ball Bearings
UNSPSC
31171531
Width
0.689 Inch / 17.5 Millimeter
| Bearing No. | 5203 | |
| Boundary dimensions(mm) | d | 17 |
| D | 40 | |
| B | 17.5 | |
| r(min) | 0.6 | |
| Basic load ratings(kN) | Cr | 16.5 |
| C0r | 8.15 | |
| Fatigue load limit(kN) | Cu | 0.420 |
| Limiting speeds(min-1) | Grease lub. | 11000 |
| Oil lub. | 14000 | |
| Load center spread(mm) | a | 20.0 |
| Mounting dimensions(mm) | da(min) | 21.5 |
| da(max) | - | |
| Da(max) | 35.5 | |
| ra(max) | 0.6 | |
| (Refer.)Mass(kg) | 0.091 |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#281283
Brand
NTN Bearing
Model
5203C3
#5032902
Brand
NSK Bearings
Model
5203JC3
#2174342
Brand
FAG Bearing
Model
3203-BD-C3
| Brand | Maxi-Lift |
| Model | HD11X6 P R |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-P46060 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-674115 |
| Brand | Boston Gear |
| Model | 832B-3.3K-M1 |
| Brand | Tingley |
| Model | J22208-3XL |
| Brand | Champion |
| Model | 705LH-15/64 |
