We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Koyo 6000 deep groove ball bearing with a 10 mm bore, 26 mm OD, and extra light 60 series. Single-row radial design for light-duty electric motors, pumps, and general rotating machinery.
MODEL 6000
$9.47 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ball Material
Steel
Bearing Type
Radial
Cage Type
Metal
Contact Angle
0
Dynamic Load Rating
438 lbf
I.D.
10 mm
icNumber
7695969
Inch/Metric
Metric Bore
Inner Ring Width
8 mm
Limiting Speed - Grease
19000 rpm
Limiting Speed - Oil
36000 rpm
Locking Device
No Locking Device
Lubricant
Mul-Temp SRL
Material
Steel
No. in Set
Single Bearing
O.D.
26 mm
O.D. Type
Straight
Origin
Single Row Radial
Outer Ring Width
8 mm
Precision
Standard
Precision Level
Standard (ABEC 1)
Rows of Balls
Single
Seal Material
Rubber
Seal Type
Contact Seals
Snap Ring
No Snap Ring
Static Load Rating [MAX]
1023 lbf
Temperature Range [MAX]
212 ?F
Temperature Range [MIN]
-22 ?F
Width
8 mm
| Bearing No. | 6000 | |
| Boundary dimensions(mm) | d | 10 |
| D | 26 | |
| B | 8 | |
| r(min) | 0.3 | |
| Basic load ratings(kN) | Cr | 5.70 |
| C0r | 1.95 | |
| Fatigue load limit(kN) | Cu | 0.100 |
| factor | f0 | 12.3 |
| Limiting speeds(min-1) | Grease lub. | 31000 |
| Oil lub. | 36000 | |
| Mounting dimensions(mm) | da(min) | 12 |
| Da(max) | 24 | |
| ra(max) | 0.3 | |
| (Refer.)Mass(kg) | 0.019 |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#207406
Brand
Nachi Bearing
Model
6000C3
#319958
Brand
SKF Bearing
Model
6000 JEM
#321072
Brand
SKF Bearing
Model
6000
#5033141
Brand
NSK Bearings
Model
6000
#284042
Brand
NTN Bearing
Model
6000
#280789
Brand
NTN Bearing
Model
6000C3
#2171303
Brand
FAG Bearing
Model
6000
#319530
Brand
SKF Bearing
Model
6000/C3
| Brand | Nachi Bearing |
| Model | 6213C3 |
