We never sell your data to third parties
Koyo 6010 2RS deep groove ball bearing, 50 mm bore, 80 mm OD, 16 mm width. Double sealed with rubber seals and steel cage. Single-row radial design for electric motors, pumps, and general industrial machinery.
MODEL 6010 2RS
$59.89 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore
16
I.D.
50 mm
O.D.
80 mm
| Bearing No. |
6010 2RS
|
|
| Boundary dimensions(mm) | d |
50
|
| D |
80
|
|
| B |
16
|
|
| r(min) |
1
|
|
| Basic load ratings(kN) | Cr |
27.3
|
| C0r |
16.6
|
|
| Fatigue load limit(kN) | Cu |
0.960
|
| factor | f0 |
15.6
|
| Limiting speeds(min-1) | Grease lub. |
8400
|
| Mounting dimensions(mm) | da(min) |
55
|
| da(max) |
57
|
|
| Da(max) |
75
|
|
| ra(max) |
1
|
|
| (Refer.)Mass(Open type)(kg) |
0.261
|
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#320593
Brand
SKF Bearing
Model
6010 2RSJEM
#319381
Brand
SKF Bearing
Model
6010-2RS1
#207859
Brand
Nachi Bearing
Model
6010-2NSE9C3
#320271
Brand
SKF Bearing
Model
6010-2RS1/C3
#5079630
Brand
Timken
Model
9110PP
#5033324
Brand
NSK Bearings
Model
6010DDUC3
#5033323
Brand
NSK Bearings
Model
6010DDU
#280470
Brand
NTN Bearing
Model
6010LLUC3/EM
| Brand | SKF Bearing |
| Model | NJ 406 MA/C3P |
| Brand | Techtop |
| Model | GA3-AL-TF-145JM-4-B-D-2 |