We never sell your data to third parties
Koyo 6209 NR is a 62 series single-row deep groove ball bearing with a 45 mm straight bore and a snap ring groove with snap ring included. The open design allows for relubrication. Suitable for electric motors, pumps, fans, and general rotating machinery. 6200 Open Bearing With Snap Ring
6209NR, 6209-NR, 6209 NR, 209SG, and 6209NRC3
MODEL 6209 NR
Nachi Bearing
$22.73
In stock
Koyo Bearing
$45.91
Timken
$9.17
MRC Bearing
$66.28
NSK Bearings
$65.77
Call to confirm
$45.91 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Material
Steel
Bearing Type
Deep Groove Ball Bearings
Bore Diameter
45 mm
Cage Material
Steel
Cage Type
Riveted
Closure Type
Open
Dynamic Load Capacity
40.9 kN
Fillet Radius
1 mm
Internal Clearance
C0
Locating Feature
Snap Ring (fitted)
Lubricant
Rust Preventative
Maximum RPM
7700 rpm Grease/9200 rpm Oil
Number of Rows
1
O.D.
85 mm
Operating Temperature Range
-30 to 120 deg C
Outer Diameter Type
Straight
Precision class
Class 0
Series
6200
Static Load Capacity
20.3 kN
Type
Round
Width
19 mm
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
