We never sell your data to third parties
Koyo 6217 is a 62 series single-row deep groove ball bearing with an 85 mm bore, 150 mm OD, and straight bore. This open-type bearing is designed for general industrial rotating equipment such as electric motors, pumps, and fans.
MODEL 6217
$148.79 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore
28
I.D.
85 mm
O.D.
150 mm
| Bearing No. | 6217 | |
| Boundary dimensions(mm) | d | 85 |
| D | 150 | |
| B | 28 | |
| r(min) | 2 | |
| Basic load ratings(kN) | Cr | 105 |
| C0r | 61.9 | |
| Fatigue load limit(kN) | Cu | 3.70 |
| factor | f0 | 14.5 |
| Limiting speeds(min-1) | Grease lub. | 4200 |
| Oil lub. | 5000 | |
| Mounting dimensions(mm) | da(min) | 94 |
| Da(max) | 141 | |
| ra(max) | 2 | |
| (Refer.)Mass(kg) | 1.79 |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#319631
Brand
SKF Bearing
Model
6217/C3
#279297
Brand
NTN Bearing
Model
6217C3
#2301595
Brand
Rollway
Model
6217 C3
#320336
Brand
SKF Bearing
Model
6217 JEM
#5033949
Brand
NSK Bearings
Model
6217C3
#208265
Brand
Nachi Bearing
Model
6217C3
#2175742
Brand
FAG Bearing
Model
6217.C3
| Brand | Pyramex |
| Model | RVZ3110X5 |
| Brand | Harwal |
| Model | 32 x 42 x 04ADLV |
| Brand | NTN Bearing |
| Model | 6005LB/5C |
| Brand | Fenner Industrial Motion |
| Model | 6410144 |