We never sell your data to third parties
Koyo CRSC-10-1 is a sealed stud type cam follower with a 0.625 in cylindrical outer diameter and 0.438 in width. This double-sealed track roller is designed for cam actuation and linear motion applications in industrial machinery.
MODEL CRSC-10-1
$25.60 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Type
Needle Bearing
Clamp Torque
20 lbf
Clamping Dia.
0.3594 in
Dynamic Load Rating
1470 lbf
Inch/Metric
Inch
Limiting Speed
5600 rpm
Material
Steel
Mounting Overhang
0.5 in
Overall Length
1.21925 in
Roller Dia.
5/8 in
Roller Type
Crowned
Roller Width
0.438 in
Stud Dia.
1/4 in
Stud Length
3/4 in
Stud Type
Standard
Thread Length
5/16 in
Thread Pitch
N/A
Thread Size
43922
Thread Type
UNF
Threads per Inch
28
Working Load
562 lbf
- Best used for high radial loads and where the bearing rolling motion occurs on the outer diameter surface
- Made from premium high carbon high chromium steel
- Uses a full complement of greased rollers that offer maximum radial load capacity
- Carburized steel studs (CR inch series) and Heavy Duty Studs (CRH inch series) offers better fracture resistance
- Screwdrive slot in head is standard (CR CRH series) Hex slot is available (CRB CRHB series)
- Seals ("S") are available Crowned ODs ("C") are avaialable Eccentric Studs ("E") are available by adding letter(s) after CR or CRH (CRS CRSB
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Bando |
| Model | 1200-S14M-2100 HP |
