We never sell your data to third parties
Koyo FNT-4060 is a thrust needle roller bearing washer with a 60 mm inner diameter, 40 mm outer diameter, and 3 mm width. This washer is used in thrust needle roller bearing assemblies to provide a hardened raceway for the needle rollers. Suitable for axial load applications in automotive transmissions, machine tools, and industrial gearboxes.
MODEL FNT-4060
$9.33 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Banded
No
Bearing Design
Cage & Roller Assembly
Bore 1
1.575 Inch / 40 Millimeter
Bore 2
1.575 Inch / 40 Millimeter
Brand
KOYO
Component Description
Roller Assembly Only
Contact I.D.
43 mm
Contact O.D.
57 mm
Diameter to Clear Assembly O.D.
61 in
Dynamic Load Rating
7080 lbf
Harmonized Tariff Code
8482.99.25.40
Height
0.118 Inch / 3 Millimeter
I.D.
40 mm
Inch - Metric
Metric
Limiting Speed - Oil
7100 rpm
Manufacturer Item Number
FNT-4060;PDL125
Matching Assembly
AS4060
O.D.
60 mm
Oil Hole
w/o Oil Hole
Origin
Needle Roller & Cage
Other Features
Single Row / Two Piece Cage
Outside Diameter
2.362 Inch / 60 Millimeter
Overall Height with Aligning Washer
0 Inch / 0 Millimeter
Precision Class
ABEC 1 / ISO P0
Precision Ground
Yes
Rolling Element
Needle Roller Bearing
Self Aligning
No
Shaft Pilot Diameter [MAX]
40 mm
Shaft Pilot Diameter [MIN]
39.9 in
Single or Double Direction
Single Direction
Static Load Rating [MAX]
29700 lbf
Thrust Bearing
Yes
Type
Thrust Roller Bearing
UNSPSC
31171500
Width
3 mm
- Best used for high axial loads that require a thin cross section
- Hardened steel cage is standard polymer cage has a .TN suffix
- Available in inch (NTA) and metric (FNT FNTA AXK) sizes
- Best used with the proper thrust washers (inch-TRA TRB etc and metric-AS GS
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Bunting Bearings |
| Model | NT101801 |
| Brand | Consolidated Bearings |
| Model | 22260E-KM C/3 CBC |
| Brand | Electra/Grove Gear |
| Model | GRL8215534.00 |
| Brand | IPTCI Bearing |
| Model | UCFCX7-23 |
