We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Koyo HJ-182616 solid race needle roller bearing with a 41.275 mm bore, 1.625 inch outer diameter, and 1 inch width. Open type design without seals for applications requiring high radial load capacity in compact spaces.
MODEL HJ-182616
$24.37 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Design
Outer Ring & Roller Assembly
Dynamic Load Rating
8170 lbf
Housing Bore - Loose Fit [MAX]
1.626 in
Housing Bore - Loose Fit [MIN]
1 5/8 in
Housing Bore - Tight Fit [MAX]
1 5/8 in
Housing Bore - Tight Fit [MIN]
1.624 in
Housing Shoulder Diameter
1.438 in
I.D.
1 1/8 in
Limiting Speed - Grease
10000 rpm
Limiting Speed - Oil
16000 rpm
O.D.
1 5/8 in
Oil Hole
w/Oil Hole
Origin
Needle Radial
Precision Ground
Yes
Self Aligning
No
Static Load Rating [MAX]
12100 lbf
Width
1 in
- Best used for high radial load applications
- Made from premium high carbon high chromium steel
- Uses hardened steel cage
- Available open or with one seal (HJTHJR RS) or with two seals (HJTT HJRR .2RS)
- There are multiple metric solid race styles available
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | MagPowr |
| Model | GBA-90 |
| Brand | Littelfuse |
| Model | 1304R1B5.5 |
