We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Koyo HJ-526828 is an open type solid race needle roller bearing with a 107.95 mm bore, 107.95 mm outside diameter, and 1.75 inch width. This machined ring design provides a rigid raceway for high radial load capacity in limited axial space. Suitable for industrial gearboxes, pumps, and machine tool spindles.
MODEL HJ-526828
$113.37 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Design
Outer Ring & Roller Assembly
Dynamic Load Rating
36400 lbf
Housing Bore - Loose Fit [MAX]
4.251 in
Housing Bore - Loose Fit [MIN]
4 1/4 in
Housing Bore - Tight Fit [MAX]
4.249 in
Housing Bore - Tight Fit [MIN]
4.248 in
Housing Shoulder Diameter
3.875 in
I.D.
3 1/4 in
Limiting Speed - Grease
3400 rpm
Limiting Speed - Oil
5300 rpm
O.D.
4 1/4 in
Oil Hole
w/Oil Hole
Origin
Needle Radial
Precision Ground
Yes
Self Aligning
No
Static Load Rating [MAX]
68600 lbf
Width
1 3/4 in
- Best used for high radial load applications
- Made from premium high carbon high chromium steel
- Uses hardened steel cage
- Available open or with one seal (HJTHJR RS) or with two seals (HJTT HJRR .2RS)
- There are multiple metric solid race styles available
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | JW Winco |
| Model | 951.1-M6-32-78-NI |