We never sell your data to third parties
SKF 3208 A-2RS1TN9/MT33 double-row angular contact ball bearing, 40mm bore, 30° contact angle. Contact seals (NBR) on both sides and glass-fiber-reinforced polyamide cage. Pre-lubricated with MT33 grease for moderate temperatures. Suitable for pumps, gearboxes, and general industrial applications.
MODEL 3208 A-2RS1TN9/MT33
$154.48 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Arrangement of Contact Angle (double-row Bearing)
Back-to-back (O)
Axial Internal Clearance
CN
Basic Dynamic Load Rating
48 kN
Basic Static Load Rating
36.5 kN
Bearing Outer Ring Locating Feature
None
Bore Diameter
40 mm
Cage
Non-metallic
Coating
Without
Contact Angle
30 °
Contact Type
Normal contact (two-point contact)
Dimension Type
Metric
I.D.
1 4/7 in
Inner Diameter (mm)
40.000
Limiting Speed
5600 r/min
Lubricant
Grease
Lubricant (in Bearing)
Grease
Matched Arrangement
No
Material
Bearing steel
Material/Treatment
Bearing steel
Number of Rows
2
O.D. (in)
3 1/7
Outer Diameter (mm)
80.000
Pack Height
86 mm
Pack Length
84 mm
Pack Width
35 mm
Relubrication Feature
Without
Ring Type
One-piece
Sealing
Seal on both sides
Sealing Type
Contact
SKF Performance Class
SKF Explorer
Type
Normal contact (two-point contact)
Universal Matching Bearing
No
Width
30.2 mm
Width (mm)
30.200
SKU: 315294
Bearing
Old hard to find bearing for a 85 year old tractor. Fit perfect and price was great.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Pyramex |
| Model | GB1810STR20 |
| Brand | NSK Bearings |
| Model | 6311VVC3 |
| Brand | PEER Bearing |
| Model | POS1752725VH |
| Brand | Century |
| Model | VB2034V1 |
SKU: 315294
Bearing
Old hard to find bearing for a 85 year old tractor. Fit perfect and price was great.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF