We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF 7318 BECBJ is a 90mm bore angular contact ball bearing with a 40° contact angle and machined brass cage. Designed for combined radial and axial loads in pumps, gearboxes, and machine-tool spindles.
MODEL 7318 BECBJ
$815.94 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Axial Internal Clearance
Not applicable
Basic Dynamic Load Rating
166 kN
Basic Static Load Rating
146 kN
Bearing Material
Bearing steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
90 mm
Cage
Steel sheet metal
Coating
Without
Contact Angle
40 °
Contact Type
Normal contact (two-point contact)
Limiting Speed
4500 r/min
Lubricant
None
Matched Arrangement
No
Matched Condition (axial Clearance/ Preload)
Axial clearance CB
Number of Rows
1
O.D.
190 mm
Pack Height
205 mm
Pack Length
200 mm
Pack Width
53 mm
Reference Speed
4300 r/min
Relubrication Feature
Without
Ring Type
One-piece inner and outer rings
Sealing
Without
SKF Performance Class
SKF Explorer
Tolerance Class
Class P6 (P6)
Universal Matching Bearing
Yes
Width
43 mm
These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.
- High-speed capability
- Accommodate relatively high radial loads and large unilateral axial loads
SKU: 5830595
Skf bearing f4b 108-rm purchase
Great price and quick shipping for a high quality SKF bearing. Exactly what we needed.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#277568
Brand
NTN Bearing
Model
7318BG
#5035339
Brand
NSK Bearings
Model
7318BWG
#2176828
Brand
FAG Bearing
Model
7318B.JP.UA
| Brand | Coilhose |
| Model | 27FCL3-GM |
SKU: 5830595
Skf bearing f4b 108-rm purchase
Great price and quick shipping for a high quality SKF bearing. Exactly what we needed.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF